STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
STM8S207S8T6CTR
詳細を表示 DataSheets

STM8S207S8T6CTR

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, consumer electronics
  • Characteristics: Low power consumption, high performance, rich peripheral set
  • Package: TQFP-44
  • Essence: 8-bit microcontroller with advanced features
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Architecture: STM8 core
  • Clock Speed: Up to 24 MHz
  • Flash Memory: 64 KB
  • RAM: 2 KB
  • Operating Voltage: 2.95V to 5.5V
  • I/O Pins: 32
  • Timers: 3 x 16-bit, 1 x 8-bit
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 10 channels
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The STM8S207S8T6CTR microcontroller has a total of 44 pins. The pin configuration is as follows:

  • Port A: PA0 to PA7
  • Port B: PB0 to PB7
  • Port C: PC0 to PC7
  • Port D: PD0 to PD7
  • Port E: PE0 to PE7
  • Port F: PF0 to PF7
  • Port G: PG0 to PG7
  • Reset Pin: NRST
  • Power Supply Pins: VDD, VSS

For a detailed pinout diagram, please refer to the datasheet.

Functional Features

  • High-performance STM8 core for efficient processing
  • Rich peripheral set including timers, communication interfaces, and ADC
  • Low power consumption for extended battery life
  • Flexible operating voltage range for versatile applications
  • Robust package design for reliable operation in various environments

Advantages and Disadvantages

Advantages

  • Cost-effective solution for 8-bit microcontroller applications
  • Wide range of communication interfaces for easy integration
  • High-performance core for efficient processing
  • Low power consumption extends battery life
  • Versatile operating voltage range allows for flexible designs

Disadvantages

  • Limited flash memory and RAM compared to 32-bit microcontrollers
  • Limited number of I/O pins for complex applications
  • Not suitable for high-performance computing tasks

Working Principles

The STM8S207S8T6CTR microcontroller is based on the STM8 core architecture. It operates by executing instructions stored in its flash memory. The core communicates with various peripherals, such as timers, communication interfaces, and ADC, to perform specific tasks. The microcontroller can be programmed using a variety of development tools and programming languages.

Detailed Application Field Plans

The STM8S207S8T6CTR microcontroller finds applications in various fields, including:

  1. Embedded systems: Used in industrial automation, smart home devices, and automotive electronics.
  2. IoT devices: Enables connectivity and control in IoT applications such as smart meters and environmental monitoring systems.
  3. Consumer electronics: Powers appliances, remote controls, and wearable devices.
  4. Medical devices: Used in portable medical equipment and patient monitoring systems.
  5. Automotive: Controls various functions in vehicles, including engine management and infotainment systems.

Detailed and Complete Alternative Models

  1. STM8S105C6T6: Similar features but with lower flash memory and fewer I/O pins.
  2. STM8S003F3P6: Basic 8-bit microcontroller with limited features and lower cost.
  3. STM8L152R8T6: Ultra-low-power microcontroller with advanced features for battery-powered applications.
  4. STM8AF5288T6: High-performance microcontroller with additional features for demanding applications.

These alternative models provide different options based on specific requirements and constraints.

Word count: 550 words

技術ソリューションにおける STM8S207S8T6CTR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of STM8S207S8T6CTR in technical solutions:

  1. Q: What is the STM8S207S8T6CTR microcontroller used for? A: The STM8S207S8T6CTR is a microcontroller commonly used in various technical solutions, such as industrial automation, consumer electronics, and automotive applications.

  2. Q: What is the maximum clock frequency supported by the STM8S207S8T6CTR? A: The STM8S207S8T6CTR supports a maximum clock frequency of 16 MHz.

  3. Q: How much flash memory does the STM8S207S8T6CTR have? A: The STM8S207S8T6CTR has 64 KB of flash memory for program storage.

  4. Q: Can I use the STM8S207S8T6CTR for real-time applications? A: Yes, the STM8S207S8T6CTR is suitable for real-time applications due to its fast execution speed and interrupt handling capabilities.

  5. Q: Does the STM8S207S8T6CTR have built-in analog-to-digital converters (ADCs)? A: Yes, the STM8S207S8T6CTR has two 10-bit ADCs with up to 16 channels for analog signal conversion.

  6. Q: What communication interfaces are available on the STM8S207S8T6CTR? A: The STM8S207S8T6CTR supports UART, SPI, and I2C communication interfaces for connecting with other devices or peripherals.

  7. Q: Can I use the STM8S207S8T6CTR for low-power applications? A: Yes, the STM8S207S8T6CTR has various low-power modes, such as Halt, Active-Halt, and Wait, which can be utilized to minimize power consumption.

  8. Q: Is the STM8S207S8T6CTR compatible with other STM8 microcontrollers? A: Yes, the STM8S207S8T6CTR is part of the STM8 family and shares a similar architecture, making it compatible with other STM8 microcontrollers.

  9. Q: What development tools are available for programming the STM8S207S8T6CTR? A: STMicroelectronics provides an integrated development environment (IDE) called "ST Visual Develop" and a range of software libraries and examples for programming the STM8S207S8T6CTR.

  10. Q: Can I use the STM8S207S8T6CTR in harsh environments? A: Yes, the STM8S207S8T6CTR is designed to operate in a wide temperature range (-40°C to +85°C) and is suitable for use in harsh industrial or automotive environments.

Please note that these answers are general and may vary depending on specific application requirements and configurations.