STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
UPSD3454EB40T6
詳細を表示 DataSheets

UPSD3454EB40T6

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Microcontroller Unit (MCU)
  • Characteristics: High-performance, low-power consumption, versatile
  • Package: 40-pin Dual In-Line Package (DIP)
  • Essence: A microcontroller unit designed for various applications requiring embedded control and processing capabilities.
  • Packaging/Quantity: Typically sold in reels or tubes containing multiple units.

Specifications

  • Architecture: 8-bit RISC (Reduced Instruction Set Computer)
  • Clock Speed: Up to 40 MHz
  • Flash Memory: 54 KB
  • RAM: 2 KB
  • EEPROM: 256 Bytes
  • I/O Pins: 32
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Timers/Counters: Multiple timers/counters with various modes
  • Operating Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The UPSD3454EB40T6 has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VCC - Power supply voltage input
  2. GND - Ground reference
  3. RESET - Reset signal input
  4. XTAL1 - Crystal oscillator input
  5. XTAL2 - Crystal oscillator output
  6. P0.0 - General-purpose I/O pin
  7. P0.1 - General-purpose I/O pin
  8. P0.2 - General-purpose I/O pin
  9. P0.3 - General-purpose I/O pin
  10. P0.4 - General-purpose I/O pin
  11. P0.5 - General-purpose I/O pin
  12. P0.6 - General-purpose I/O pin
  13. P0.7 - General-purpose I/O pin
  14. P1.0 - General-purpose I/O pin
  15. P1.1 - General-purpose I/O pin
  16. P1.2 - General-purpose I/O pin
  17. P1.3 - General-purpose I/O pin
  18. P1.4 - General-purpose I/O pin
  19. P1.5 - General-purpose I/O pin
  20. P1.6 - General-purpose I/O pin
  21. P1.7 - General-purpose I/O pin
  22. P2.0 - General-purpose I/O pin
  23. P2.1 - General-purpose I/O pin
  24. P2.2 - General-purpose I/O pin
  25. P2.3 - General-purpose I/O pin
  26. P2.4 - General-purpose I/O pin
  27. P2.5 - General-purpose I/O pin
  28. P2.6 - General-purpose I/O pin
  29. P2.7 - General-purpose I/O pin
  30. P3.0 - General-purpose I/O pin
  31. P3.1 - General-purpose I/O pin
  32. P3.2 - General-purpose I/O pin
  33. P3.3 - General-purpose I/O pin
  34. P3.4 - General-purpose I/O pin
  35. P3.5 - General-purpose I/O pin
  36. P3.6 - General-purpose I/O pin
  37. P3.7 - General-purpose I/O pin
  38. ALE - Address Latch Enable
  39. PSEN - Program Store Enable
  40. EA/VPP - External Access/Programming Voltage

Functional Features

  • High-performance 8-bit RISC architecture for efficient processing.
  • Versatile I/O pins for interfacing with external devices.
  • Multiple communication interfaces (UART, SPI, I2C) for seamless data exchange.
  • Built-in analog-to-digital converter for precise analog signal measurements.
  • Timers/counters with various modes for accurate timing and event counting.
  • Low-power consumption for energy-efficient applications.
  • Robust operating voltage and temperature range for reliable operation in diverse environments.

Advantages and Disadvantages

Advantages: - High-performance processing capabilities. - Versatility in terms of I/O and communication options. - Efficient power management for low-power applications. - Wide operating voltage and temperature range. - Compact 40-pin package suitable for space-constrained designs.

Disadvantages: - Limited program memory compared to higher-end microcontrollers. - Limited RAM capacity for data storage. - Lack of advanced features found in more specialized microcontrollers.

Working Principles

The UPSD3454EB40T6 operates based on an 8-bit RISC architecture. It executes instructions stored in its flash memory, utilizing the available RAM for temporary data storage. The microcontroller communicates with external devices through its I/O pins

技術ソリューションにおける UPSD3454EB40T6 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of UPSD3454EB40T6 in technical solutions:

  1. Q: What is UPSD3454EB40T6? A: UPSD3454EB40T6 is a microcontroller unit (MCU) manufactured by NXP Semiconductors.

  2. Q: What are the key features of UPSD3454EB40T6? A: Some key features of UPSD3454EB40T6 include an 8-bit 8051-compatible CPU, flash memory, SRAM, multiple timers, UART, SPI, I2C interfaces, and analog-to-digital converters.

  3. Q: What are the typical applications of UPSD3454EB40T6? A: UPSD3454EB40T6 is commonly used in various technical solutions such as industrial control systems, power management units, motor control, home automation, and IoT devices.

  4. Q: How much flash memory does UPSD3454EB40T6 have? A: UPSD3454EB40T6 has 32KB of flash memory for storing program code.

  5. Q: Can UPSD3454EB40T6 be programmed using C or assembly language? A: Yes, UPSD3454EB40T6 can be programmed using both C and assembly language.

  6. Q: Does UPSD3454EB40T6 support communication protocols like UART and SPI? A: Yes, UPSD3454EB40T6 supports UART, SPI, and I2C interfaces for communication with other devices.

  7. Q: What is the operating voltage range of UPSD3454EB40T6? A: The operating voltage range of UPSD3454EB40T6 is typically between 2.7V and 5.5V.

  8. Q: Can UPSD3454EB40T6 be powered directly from a battery? A: Yes, UPSD3454EB40T6 can be powered directly from a battery within the specified voltage range.

  9. Q: Does UPSD3454EB40T6 have any built-in analog-to-digital converters (ADC)? A: Yes, UPSD3454EB40T6 has two 10-bit ADCs for converting analog signals to digital values.

  10. Q: Is UPSD3454EB40T6 suitable for low-power applications? A: Yes, UPSD3454EB40T6 has power-saving features like multiple sleep modes and wake-up sources, making it suitable for low-power applications.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.