Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AMC1300BDWV
詳細を表示 DataSheets

AMC1300BDWV

Product Overview

Category

The AMC1300BDWV belongs to the category of integrated isolated current sensors.

Use

It is primarily used for measuring and monitoring AC and DC currents in various applications.

Characteristics

  • Integrated isolation technology ensures electrical safety.
  • High accuracy and linearity for precise current measurement.
  • Wide operating temperature range for versatile usage.
  • Low power consumption for energy efficiency.
  • Compact package for easy integration into different systems.

Package

The AMC1300BDWV is available in a small-sized, surface-mountable package.

Essence

The essence of the AMC1300BDWV lies in its ability to accurately measure currents while providing electrical isolation, ensuring safety and reliability in diverse applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply voltage: 3.3 V to 5 V
  • Isolation voltage: 4 kV
  • Input current range: ±50 A
  • Output voltage range: 0 V to Vcc
  • Bandwidth: 80 kHz
  • Temperature range: -40°C to +125°C

Detailed Pin Configuration

The AMC1300BDWV has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. VIOUT+: Positive output voltage
  4. VIOUT-: Negative output voltage
  5. NC: No connection
  6. VIN+: Positive input voltage
  7. VIN-: Negative input voltage

Functional Features

  • High accuracy current sensing
  • Galvanic isolation between input and output
  • Low offset and gain error
  • Fast response time
  • Wide bandwidth for accurate signal transmission

Advantages and Disadvantages

Advantages

  • Accurate current measurement
  • Electrical isolation ensures safety
  • Wide operating temperature range
  • Compact size for easy integration
  • Low power consumption

Disadvantages

  • Limited input current range
  • Requires external components for complete functionality

Working Principles

The AMC1300BDWV utilizes Hall-effect technology to measure the magnetic field generated by the current flowing through the primary conductor. This magnetic field is then converted into a proportional voltage, which is isolated from the input side using integrated isolation techniques. The output voltage is linearly related to the input current, providing an accurate representation of the measured current.

Detailed Application Field Plans

The AMC1300BDWV finds applications in various fields, including:

  1. Industrial automation: Current monitoring in motor control systems, power supplies, and inverters.
  2. Renewable energy: Current sensing in solar inverters, wind turbines, and battery management systems.
  3. Automotive: Current measurement in electric vehicle charging stations, battery monitoring, and traction control systems.
  4. Power distribution: Current monitoring in smart grid systems, circuit breakers, and power quality analyzers.

Detailed and Complete Alternative Models

  1. AMC1311: Similar to AMC1300BDWV but with higher input current range (+/- 100 A).
  2. AMC1324: Dual-channel version of AMC1300BDWV for simultaneous measurement of two currents.
  3. AMC1336: Higher accuracy variant with lower offset and gain error.

These alternative models provide options based on specific requirements and offer similar functionalities to the AMC1300BDWV.

Word count: 461 words

技術ソリューションにおける AMC1300BDWV の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AMC1300BDWV in technical solutions:

  1. Q: What is the AMC1300BDWV? A: The AMC1300BDWV is a high-precision, isolated delta-sigma modulator with an integrated digital filter. It is commonly used for current sensing and voltage measurement applications.

  2. Q: How does the AMC1300BDWV provide isolation? A: The AMC1300BDWV uses integrated capacitive isolation technology to provide galvanic isolation between the input and output sides, ensuring safety and preventing ground loop issues.

  3. Q: What is the input voltage range of the AMC1300BDWV? A: The AMC1300BDWV has a wide input voltage range of ±250 mV, allowing it to accurately measure small signals while maintaining high linearity.

  4. Q: Can the AMC1300BDWV be used for both AC and DC measurements? A: Yes, the AMC1300BDWV can be used for both AC and DC measurements. Its high common-mode rejection ratio (CMRR) allows accurate measurement of both types of signals.

  5. Q: What is the resolution of the AMC1300BDWV? A: The AMC1300BDWV has a resolution of 16 bits, providing high precision and accuracy in measurement applications.

  6. Q: Is the AMC1300BDWV suitable for high-frequency applications? A: Yes, the AMC1300BDWV has a high bandwidth of up to 400 kHz, making it suitable for high-frequency applications such as motor control and power monitoring.

  7. Q: Can the AMC1300BDWV operate in harsh environments? A: Yes, the AMC1300BDWV is designed to operate in harsh industrial environments. It has a wide temperature range and is resistant to electromagnetic interference (EMI).

  8. Q: Does the AMC1300BDWV require an external power supply? A: Yes, the AMC1300BDWV requires an external power supply for operation. It typically operates from a single 5 V supply.

  9. Q: Can multiple AMC1300BDWV devices be used in parallel? A: Yes, multiple AMC1300BDWV devices can be used in parallel to measure multiple channels simultaneously, providing scalability in multi-channel applications.

  10. Q: What are some typical applications of the AMC1300BDWV? A: The AMC1300BDWV is commonly used in applications such as motor control, power monitoring, renewable energy systems, industrial automation, and electric vehicle charging stations.

Please note that these answers are general and may vary depending on specific application requirements.