CDCVF2509APWG4

Overview

Category

CDCVF2509APWG4 belongs to the category of integrated circuits (ICs).

Use

It is commonly used in electronic devices for clock distribution and synchronization purposes.

Characteristics

• High-speed clock distribution
• Low jitter
• Wide operating voltage range
• Small package size

Package

CDCVF2509APWG4 is available in a small-sized surface mount package.

Essence

The essence of CDCVF2509APWG4 lies in its ability to distribute and synchronize clock signals efficiently.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications and Parameters

• Operating Voltage Range: 2.3V to 3.6V
• Clock Frequency Range: Up to 200 MHz
• Number of Outputs: 9
• Output Logic Levels: CMOS/TTL compatible
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

For detailed and complete pin configuration, please refer to the datasheet of CDCVF2509APWG4.

Functional Characteristics

CDCVF2509APWG4 offers the following functional characteristics:

• High-speed clock distribution to multiple outputs
• Low output skew and jitter
• Programmable output delay
• Power-down mode for reduced power consumption
• ESD protection on all pins

Advantages and Disadvantages

Advantages

• Efficient clock distribution
• Low jitter and skew
• Wide operating voltage range
• Small package size

Disadvantages

• Limited number of outputs (9)

Applicable Range of Products

CDCVF2509APWG4 is suitable for various electronic devices that require clock distribution and synchronization, such as:

• Computer motherboards
• Networking equipment
• Communication systems
• Test and measurement instruments
• Consumer electronics

Working Principles

CDCVF2509APWG4 operates by receiving a clock signal at its input and distributing it to multiple outputs with minimal skew and jitter. It utilizes internal circuitry to ensure accurate synchronization and timing.

Detailed Application Field Plans

CDCVF2509APWG4 can be applied in the following fields:

1. Computer Motherboards: Provides synchronized clock signals to various components, ensuring proper operation and data transfer.
2. Networking Equipment: Facilitates precise timing for data transmission and reception in network switches and routers.
3. Communication Systems: Enables accurate synchronization of clocks in telecommunication infrastructure, improving signal integrity.
4. Test and Measurement Instruments: Supports precise timing and synchronization in oscilloscopes, logic analyzers, and other test equipment.
5. Consumer Electronics: Enhances the performance of audio/video devices, gaming consoles, and other consumer electronic products that rely on accurate timing.

Detailed Alternative Models

Some alternative models to CDCVF2509APWG4 include:

• CDCVF2509PWR
• CDCVF2509APW
• CDCVF2509APWRG4
• CDCVF2509APWRE4

5 Common Technical Questions and Answers

1. Q: What is the maximum clock frequency supported by CDCVF2509APWG4? A: CDCVF2509APWG4 supports clock frequencies up to 200 MHz.

2. Q: Can CDCVF2509APWG4 operate with a voltage below 2.3V? A: No, the operating voltage range for CDCVF2509APWG4 is 2.3V to 3.6V.

3. Q: How many outputs does CDCVF2509APWG4 have? A: CDCVF2509APWG4 has 9 outputs.

4. Q: Does CDCVF2509APWG4 have ESD protection on all pins? A: Yes, CDCVF2509APWG4 features ESD protection on all pins.

5. Q: Can CDCVF2509APWG4 be used in automotive applications? A: No, CDCVF2509APWG4 is not suitable for automotive applications due to its operating temperature range (-40°C to +85°C).

This encyclopedia entry contains approximately 570 words.