Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
INA132UA
詳細を表示 DataSheets

INA132UA

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Instrumentation Amplifier
  • Characteristics: High precision, low noise, differential voltage amplification
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Amplify small differential voltages accurately and reject common-mode noise
  • Packaging/Quantity: Tube packaging, 50 units per tube

Specifications

  • Supply Voltage: ±2.25V to ±18V
  • Input Offset Voltage: ±0.5mV (maximum)
  • Input Bias Current: ±1nA (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Input Common-Mode Voltage Range: -Vs + 1.8V to +Vs - 1.8V
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The INA132UA has a total of 8 pins:

  1. V+
  2. V-
  3. REF
  4. RG
  5. OUT
  6. NC
  7. IN-
  8. IN+

Functional Features

  • High common-mode rejection ratio (CMRR) of 120dB
  • Low input offset voltage and bias current for accurate amplification
  • Wide supply voltage range allows flexibility in various applications
  • Rail-to-rail output swing for maximum dynamic range
  • Low power consumption for energy efficiency

Advantages

  • Accurate amplification of small differential voltages
  • Excellent rejection of common-mode noise
  • Versatile supply voltage range enables compatibility with different systems
  • Suitable for low-power applications
  • Compact SOIC package for space-constrained designs

Disadvantages

  • Limited gain bandwidth product compared to some alternative models
  • Higher input offset voltage compared to certain high-precision amplifiers
  • Not suitable for high-frequency applications

Working Principles

The INA132UA is an instrumentation amplifier that amplifies small differential voltages while rejecting common-mode noise. It consists of three operational amplifiers and precision resistors. The input stage provides high input impedance, while the output stage delivers a low impedance signal. By adjusting the gain resistor (RG), the amplification factor can be set according to the application requirements.

Detailed Application Field Plans

The INA132UA finds applications in various fields, including:

  1. Biomedical instrumentation: Amplifying weak bioelectric signals for monitoring and diagnosis
  2. Industrial process control: Precise measurement of sensor outputs in harsh environments
  3. Strain gauge amplification: Accurate measurement of mechanical strain in structural analysis
  4. Data acquisition systems: Signal conditioning for accurate data conversion
  5. Temperature and pressure sensing: Amplification of small sensor outputs for precise measurements

Detailed and Complete Alternative Models

  1. AD620: Instrumentation amplifier with higher gain bandwidth product
  2. INA333: Low-power instrumentation amplifier with lower input offset voltage
  3. AD8221: Precision instrumentation amplifier with higher CMRR and lower noise

These alternative models offer different trade-offs in terms of performance and specifications, allowing users to choose the most suitable option for their specific application needs.

Word count: 347 words

技術ソリューションにおける INA132UA の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of INA132UA in technical solutions:

  1. Q: What is INA132UA? A: INA132UA is a precision instrumentation amplifier that is commonly used for amplifying small differential signals in various technical applications.

  2. Q: What is the voltage supply range for INA132UA? A: The voltage supply range for INA132UA is typically between ±2.25V and ±18V.

  3. Q: What is the input voltage range of INA132UA? A: The input voltage range of INA132UA is typically between ±Vs/2, where Vs is the supply voltage.

  4. Q: Can INA132UA handle high common-mode voltages? A: Yes, INA132UA has a high common-mode rejection ratio (CMRR) which allows it to effectively reject common-mode voltages.

  5. Q: What is the gain accuracy of INA132UA? A: The gain accuracy of INA132UA is typically within 0.01% to 0.05%, depending on the specific model.

  6. Q: Is INA132UA suitable for low-power applications? A: Yes, INA132UA is designed to operate at low power and has a low quiescent current consumption.

  7. Q: Can INA132UA be used in temperature-sensitive environments? A: Yes, INA132UA has a wide operating temperature range and can be used in temperature-sensitive environments.

  8. Q: What is the bandwidth of INA132UA? A: The bandwidth of INA132UA is typically around 1 MHz, allowing it to accurately amplify signals within this frequency range.

  9. Q: Does INA132UA have built-in protection features? A: Yes, INA132UA has built-in protection features such as overvoltage protection and thermal shutdown to ensure safe operation.

  10. Q: What are some common applications of INA132UA? A: Some common applications of INA132UA include medical instrumentation, strain gauge amplification, data acquisition systems, and industrial process control.

Please note that the specific details and specifications may vary depending on the manufacturer and model of INA132UA. It is always recommended to refer to the datasheet for accurate information.