Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MSP430FR5987IPMR
詳細を表示 DataSheets

MSP430FR5987IPMR

Product Overview

Category

The MSP430FR5987IPMR belongs to the category of microcontrollers.

Use

It is primarily used for embedded systems and Internet of Things (IoT) applications.

Characteristics

  • Low power consumption
  • High performance
  • Integrated peripherals
  • Non-volatile memory
  • Real-time clock

Package

The MSP430FR5987IPMR comes in a small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to provide efficient and reliable control for various electronic devices.

Packaging/Quantity

The MSP430FR5987IPMR is typically packaged in reels and is available in large quantities.

Specifications

  • Microcontroller core: MSP430
  • Clock frequency: Up to 16 MHz
  • Flash memory: 128 KB
  • RAM: 4 KB
  • Operating voltage: 1.8V - 3.6V
  • Number of I/O pins: 48
  • ADC resolution: 12-bit
  • Communication interfaces: UART, SPI, I2C

Detailed Pin Configuration

The MSP430FR5987IPMR has a total of 48 pins, each serving a specific purpose. The pin configuration is as follows:

  • Pins 1-8: Digital I/O pins
  • Pins 9-16: Analog input pins
  • Pins 17-24: Communication interface pins
  • Pins 25-32: Power supply and ground pins
  • Pins 33-40: Timer and PWM pins
  • Pins 41-48: Additional I/O pins

Functional Features

  • Low power modes for energy-efficient operation
  • Integrated analog-to-digital converter (ADC)
  • Real-time clock for accurate timekeeping
  • Multiple communication interfaces for data exchange
  • Hardware encryption module for secure data transmission
  • Built-in temperature sensor for environmental monitoring

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable devices.
  • Integrated peripherals reduce the need for external components.
  • Real-time clock ensures accurate timing in time-sensitive applications.
  • Hardware encryption module enhances data security.

Disadvantages

  • Limited RAM capacity may restrict the complexity of applications.
  • Higher cost compared to some other microcontrollers in the market.
  • Steeper learning curve for beginners due to advanced features.

Working Principles

The MSP430FR5987IPMR operates based on the principles of a microcontroller. It executes instructions stored in its flash memory, interacts with external devices through various communication interfaces, and controls the flow of data within an embedded system. The low power modes allow the microcontroller to conserve energy when not actively processing tasks.

Detailed Application Field Plans

The MSP430FR5987IPMR finds applications in various fields, including but not limited to:

  1. Home automation systems
  2. Industrial control systems
  3. Wearable devices
  4. Medical equipment
  5. Smart agriculture
  6. Energy management systems

Detailed and Complete Alternative Models

  1. MSP430FR5994IPMR
  2. MSP430FR5969IPMR
  3. MSP430FR6989IPMR
  4. MSP430FR5739IPMR
  5. MSP430FR4133IPMR

These alternative models offer similar functionalities and can be considered as alternatives to the MSP430FR5987IPMR depending on specific requirements.

In conclusion, the MSP430FR5987IPMR is a versatile microcontroller that combines low power consumption, high performance, and integrated peripherals. Its compact package and extensive feature set make it suitable for a wide range of applications in various industries.

技術ソリューションにおける MSP430FR5987IPMR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MSP430FR5987IPMR in technical solutions:

  1. Q: What is MSP430FR5987IPMR? A: MSP430FR5987IPMR is a microcontroller from Texas Instruments' MSP430 family, specifically designed for low-power applications.

  2. Q: What are the key features of MSP430FR5987IPMR? A: Some key features include ultra-low power consumption, integrated FRAM memory, multiple communication interfaces, and a wide range of peripherals.

  3. Q: What are some typical applications of MSP430FR5987IPMR? A: MSP430FR5987IPMR is commonly used in battery-powered devices, IoT applications, sensor networks, industrial automation, and portable medical devices.

  4. Q: How does MSP430FR5987IPMR achieve low power consumption? A: It utilizes various power-saving techniques such as low-power modes, intelligent peripherals, and clock gating to minimize energy consumption.

  5. Q: Can I program MSP430FR5987IPMR using C/C++? A: Yes, you can program MSP430FR5987IPMR using C/C++ programming languages. Texas Instruments provides an IDE called Code Composer Studio for development.

  6. Q: Does MSP430FR5987IPMR support real-time operating systems (RTOS)? A: Yes, MSP430FR5987IPMR is compatible with popular RTOS like FreeRTOS, TI-RTOS, and Micrium µC/OS-II, enabling multitasking capabilities in your application.

  7. Q: What is FRAM memory, and why is it advantageous? A: FRAM (Ferroelectric Random Access Memory) is a non-volatile memory technology that combines the benefits of both flash memory and RAM. It offers fast write speeds, high endurance, and low power consumption.

  8. Q: Can I interface MSP430FR5987IPMR with other devices? A: Yes, MSP430FR5987IPMR has various communication interfaces like UART, SPI, I2C, and USB, allowing seamless integration with external sensors, displays, and other peripherals.

  9. Q: What development tools are available for MSP430FR5987IPMR? A: Texas Instruments provides Code Composer Studio (CCS) IDE, which includes a compiler, debugger, and other useful tools for developing applications on MSP430FR5987IPMR.

  10. Q: Are there any evaluation boards or development kits available for MSP430FR5987IPMR? A: Yes, Texas Instruments offers the MSP-EXP430FR5994 LaunchPad Development Kit, which is specifically designed for MSP430FR5987IPMR and provides an easy way to start prototyping and testing your applications.

Please note that these questions and answers are general in nature and may vary depending on specific requirements and use cases.