OPA2316IDRGT
Product Overview
The OPA2316IDRGT belongs to the category of operational amplifiers (op-amps) and is commonly used in electronic circuits for signal processing and amplification. This op-amp is known for its high precision, low noise, and wide bandwidth characteristics. It is available in a small package and is widely used in various applications across different industries.
Basic Information
- Category: Operational Amplifier
- Use: Signal Processing and Amplification
- Characteristics: High Precision, Low Noise, Wide Bandwidth
- Package: Small Outline Package (SOP)
- Essence: High-performance operational amplifier
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Supply Voltage: ±2 V to ±18 V
- Input Offset Voltage: 150 µV (max)
- Input Bias Current: 1 pA (max)
- Gain Bandwidth Product: 10 MHz
- Slew Rate: 7 V/µs
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The OPA2316IDRGT has a standard pin configuration with eight pins: 1. OUT: Output 2. -IN: Inverting Input 3. +IN: Non-Inverting Input 4. V-: Negative Power Supply 5. NC: Not Connected 6. V+: Positive Power Supply 7. NC: Not Connected 8. VCC: Positive Power Supply
Functional Features
- High Precision: Provides accurate amplification of input signals
- Low Noise: Minimizes unwanted interference in the output signal
- Wide Bandwidth: Supports a broad range of frequencies for signal processing
Advantages and Disadvantages
Advantages
- High precision and accuracy
- Low noise for clean signal amplification
- Wide bandwidth for versatile applications
Disadvantages
- Limited supply voltage range compared to some other op-amps
- Higher cost compared to standard op-amps
Working Principles
The OPA2316IDRGT operates based on the principles of differential amplification, where the difference between the non-inverting and inverting inputs is amplified to produce the output signal. It utilizes internal circuitry to achieve high precision and low noise characteristics.
Detailed Application Field Plans
The OPA2316IDRGT is widely used in the following application fields: - Instrumentation Amplifiers - Data Acquisition Systems - Sensor Signal Conditioning - Audio Processing Equipment - Test and Measurement Instruments
Detailed and Complete Alternative Models
Some alternative models to OPA2316IDRGT include: - OPA227 - OPA333 - OPA1612 - LM324 - AD822
In conclusion, the OPA2316IDRGT is a high-performance operational amplifier with precise amplification, low noise, and wide bandwidth capabilities. Its compact size and functional features make it suitable for a wide range of applications in various industries.
Word Count: 443
技術ソリューションにおける OPA2316IDRGT の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the OPA2316IDRGT used for?
- The OPA2316IDRGT is a precision operational amplifier designed for applications that require low offset voltage and low noise.
What is the input voltage range of the OPA2316IDRGT?
- The input voltage range of the OPA2316IDRGT is typically ±4.5V, making it suitable for a wide range of signal conditioning applications.
What is the typical gain bandwidth product of the OPA2316IDRGT?
- The OPA2316IDRGT has a typical gain bandwidth product of 10 MHz, allowing it to handle high-frequency signals with precision.
Can the OPA2316IDRGT operate with a single power supply?
- Yes, the OPA2316IDRGT can operate with a single power supply, making it suitable for battery-powered or single-supply applications.
What is the maximum output current of the OPA2316IDRGT?
- The OPA2316IDRGT can typically deliver up to 50 mA of output current, enabling it to drive capacitive loads and other demanding applications.
Is the OPA2316IDRGT suitable for low-power applications?
- Yes, the OPA2316IDRGT has a low quiescent current of 375 µA per channel, making it well-suited for low-power designs.
What are the typical applications of the OPA2316IDRGT?
- The OPA2316IDRGT is commonly used in precision instrumentation, data acquisition systems, sensor interfaces, and audio processing equipment.
Does the OPA2316IDRGT have built-in protection features?
- Yes, the OPA2316IDRGT includes built-in overvoltage and reverse-voltage protection, enhancing its robustness in various operating conditions.
What is the temperature range for the OPA2316IDRGT?
- The OPA2316IDRGT is specified to operate over a temperature range of -40°C to 125°C, making it suitable for harsh environments.
Can the OPA2316IDRGT be used in automotive applications?
- Yes, the OPA2316IDRGT is qualified for automotive applications, meeting the stringent requirements for reliability and performance in automotive electronics.