Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
OPA2317ID
詳細を表示 DataSheets

OPA2317ID

Product Overview

Category

OPA2317ID belongs to the category of operational amplifiers (op-amps).

Use

The OPA2317ID op-amp is commonly used in various electronic circuits for amplification, filtering, and signal conditioning purposes.

Characteristics

  • Low input offset voltage
  • High gain bandwidth product
  • Rail-to-rail input and output
  • Low noise
  • Low power consumption

Package

OPA2317ID is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of OPA2317ID lies in its ability to provide accurate and high-quality amplification of electrical signals.

Packaging/Quantity

OPA2317ID is typically sold in reels or tubes containing a specified quantity of units, such as 250 or 1000 pieces per reel/tube.

Specifications

  • Supply Voltage: ±2.25V to ±5.5V
  • Input Offset Voltage: 500µV (maximum)
  • Gain Bandwidth Product: 10MHz
  • Input Bias Current: 1pA (typical)
  • Output Current: 50mA (maximum)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The OPA2317ID op-amp has a standard pin configuration with eight pins:

  1. V+ (Positive Power Supply)
  2. V- (Negative Power Supply)
  3. IN- (Inverting Input)
  4. IN+ (Non-Inverting Input)
  5. OUT (Output)
  6. NC (No Connection)
  7. NC (No Connection)
  8. VCC (Supply Voltage)

Functional Features

  • Low input offset voltage ensures accurate signal amplification.
  • High gain bandwidth product allows for amplification of higher frequency signals.
  • Rail-to-rail input and output capability enables the op-amp to handle signals close to the power supply rails.
  • Low noise performance ensures minimal interference with the desired signal.
  • Low power consumption makes it suitable for battery-powered applications.

Advantages and Disadvantages

Advantages

  • Accurate amplification of signals
  • Wide operating temperature range
  • Rail-to-rail input and output capability
  • Low power consumption

Disadvantages

  • Limited output current capacity
  • Higher input offset voltage compared to some other op-amps

Working Principles

The OPA2317ID op-amp operates based on the principles of differential amplification. It amplifies the voltage difference between its inverting and non-inverting inputs, producing an amplified output signal.

Detailed Application Field Plans

OPA2317ID finds applications in various fields, including: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Active filters 4. Data acquisition systems 5. Portable instrumentation

Detailed and Complete Alternative Models

Some alternative models to OPA2317ID include: - OPA2134 - LM358 - TL072 - AD822

These alternatives offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 345 words

技術ソリューションにおける OPA2317ID の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of OPA2317ID in technical solutions:

  1. Q: What is OPA2317ID? A: OPA2317ID is a low-power, precision operational amplifier (op-amp) commonly used in various electronic circuits.

  2. Q: What is the voltage supply range for OPA2317ID? A: The voltage supply range for OPA2317ID is typically between +2.7V and +5.5V.

  3. Q: What is the input voltage range of OPA2317ID? A: The input voltage range of OPA2317ID extends from the negative supply voltage (V-) to the positive supply voltage (V+).

  4. Q: What is the typical gain bandwidth product (GBW) of OPA2317ID? A: The typical gain bandwidth product of OPA2317ID is around 10 MHz.

  5. Q: Can OPA2317ID operate with a single power supply? A: Yes, OPA2317ID can operate with a single power supply as long as it is within the specified voltage range.

  6. Q: What is the typical input offset voltage of OPA2317ID? A: The typical input offset voltage of OPA2317ID is very low, usually in the microvolt range.

  7. Q: Is OPA2317ID suitable for low-power applications? A: Yes, OPA2317ID is designed for low-power applications, making it ideal for battery-powered devices.

  8. Q: Can OPA2317ID drive capacitive loads? A: Yes, OPA2317ID has a high output current capability, allowing it to drive capacitive loads without significant distortion.

  9. Q: What is the typical input bias current of OPA2317ID? A: The typical input bias current of OPA2317ID is very low, typically in the nanoampere range.

  10. Q: Can OPA2317ID be used in precision measurement applications? A: Yes, OPA2317ID's low offset voltage and low drift make it suitable for precision measurement applications where accuracy is crucial.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.