Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
OPA363AIDBVT
詳細を表示 DataSheets

OPA363AIDBVT

Product Overview

Category

The OPA363AIDBVT belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used as a high-speed, low-power voltage feedback amplifier in various electronic circuits.

Characteristics

  • High speed
  • Low power consumption
  • Voltage feedback architecture

Package

The OPA363AIDBVT is available in a small SOT-23 package, making it suitable for space-constrained applications.

Essence

This op-amp is essential for amplifying and processing analog signals in electronic systems.

Packaging/Quantity

The OPA363AIDBVT is typically sold in reels containing a specific quantity, such as 3000 units per reel.

Specifications

  • Supply Voltage: ±2.5V to ±6V
  • Bandwidth: 50MHz
  • Slew Rate: 150V/µs
  • Quiescent Current: 1.4mA
  • Input Offset Voltage: 1mV
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The OPA363AIDBVT has a standard pin configuration with 5 pins: 1. OUT: Output 2. V+: Positive Power Supply 3. V-: Negative Power Supply 4. NC: Not Connected 5. IN-: Inverting Input 6. IN+: Non-Inverting Input

Functional Features

  • High-speed signal amplification
  • Low power consumption
  • Wide operating temperature range
  • Small form factor

Advantages

  • Suitable for low-power applications
  • High bandwidth for fast signal processing
  • Small package size for space-constrained designs

Disadvantages

  • Limited supply voltage range compared to some other op-amps
  • May not be suitable for high-voltage applications

Working Principles

The OPA363AIDBVT operates based on the principles of voltage feedback amplification, where the difference between the non-inverting and inverting input voltages is amplified and provided at the output.

Detailed Application Field Plans

The OPA363AIDBVT is widely used in the following applications: - Portable instrumentation - Battery-powered devices - Sensor signal conditioning - Audio amplification

Detailed and Complete Alternative Models

Some alternative models to the OPA363AIDBVT include: - OPA355: Lower power consumption - OPA376: Higher slew rate - OPA340: Single-supply operation

In conclusion, the OPA363AIDBVT is a versatile operational amplifier with high-speed and low-power characteristics, making it suitable for a wide range of electronic applications.

[Word Count: 366]

技術ソリューションにおける OPA363AIDBVT の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the OPA363AIDBVT?

    • The OPA363AIDBVT is a low-power, single-supply operational amplifier designed for applications requiring rail-to-rail input and output operation.

  2. What is the typical supply voltage range for OPA363AIDBVT?

    • The typical supply voltage range for OPA363AIDBVT is from 1.8V to 5.5V.

  3. What are the typical applications of OPA363AIDBVT?

    • Typical applications include battery-powered instrumentation, sensor interfaces, and portable medical devices.

  4. What is the input offset voltage of OPA363AIDBVT?

    • The input offset voltage is typically 150µV for OPA363AIDBVT.

  5. What is the gain bandwidth product of OPA363AIDBVT?

    • The gain bandwidth product is typically 10MHz for OPA363AIDBVT.

  6. What is the quiescent current consumption of OPA363AIDBVT?

    • The quiescent current consumption is typically 550µA for OPA363AIDBVT.

  7. What is the temperature range for OPA363AIDBVT?

    • The operating temperature range is typically from -40°C to 125°C for OPA363AIDBVT.

  8. Can OPA363AIDBVT be used in single-supply applications?

    • Yes, OPA363AIDBVT is designed for single-supply applications.

  9. What is the output voltage swing of OPA363AIDBVT?

    • The output voltage swing is typically within 10mV of the rails for OPA363AIDBVT.

  10. Is OPA363AIDBVT available in a small package?

    • Yes, OPA363AIDBVT is available in the SOT-23 package, making it suitable for space-constrained applications.