Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SN74ABT16501DLR
詳細を表示 DataSheets

SN74ABT16501DLR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Data Bus Transceiver
  • Characteristics: High-speed, bidirectional, 18-bit transceiver
  • Package: 56-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: Facilitates bidirectional data transfer between two independent buses
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay: 3.8ns
  • Maximum Operating Frequency: 200MHz

Detailed Pin Configuration

The SN74ABT16501DLR has a total of 56 pins. The pin configuration is as follows:

  1. OE1 (Output Enable 1)
  2. I/O1A0 (Input/Output 1A0)
  3. I/O1A1 (Input/Output 1A1)
  4. GND (Ground)
  5. I/O1A2 (Input/Output 1A2)
  6. I/O1A3 (Input/Output 1A3)
  7. VCC (Supply Voltage)
  8. I/O1A4 (Input/Output 1A4)
  9. I/O1A5 (Input/Output 1A5)
  10. I/O1A6 (Input/Output 1A6)
  11. I/O1A7 (Input/Output 1A7)
  12. I/O1A8 (Input/Output 1A8)
  13. I/O1A9 (Input/Output 1A9)
  14. I/O1A10 (Input/Output 1A10)
  15. I/O1A11 (Input/Output 1A11)
  16. I/O1A12 (Input/Output 1A12)
  17. I/O1A13 (Input/Output 1A13)
  18. I/O1A14 (Input/Output 1A14)
  19. I/O1A15 (Input/Output 1A15)
  20. GND (Ground)
  21. I/O2A0 (Input/Output 2A0)
  22. I/O2A1 (Input/Output 2A1)
  23. VCC (Supply Voltage)
  24. I/O2A2 (Input/Output 2A2)
  25. I/O2A3 (Input/Output 2A3)
  26. GND (Ground)
  27. I/O2A4 (Input/Output 2A4)
  28. I/O2A5 (Input/Output 2A5)
  29. I/O2A6 (Input/Output 2A6)
  30. I/O2A7 (Input/Output 2A7)
  31. I/O2A8 (Input/Output 2A8)
  32. I/O2A9 (Input/Output 2A9)
  33. I/O2A10 (Input/Output 2A10)
  34. I/O2A11 (Input/Output 2A11)
  35. I/O2A12 (Input/Output 2A12)
  36. I/O2A13 (Input/Output 2A13)
  37. I/O2A14 (Input/Output 2A14)
  38. I/O2A15 (Input/Output 2A15)
  39. GND (Ground)
  40. OE2 (Output Enable 2)
  41. I/O1B0 (Input/Output 1B0)
  42. I/O1B1 (Input/Output 1B1)
  43. VCC (Supply Voltage)
  44. I/O1B2 (Input/Output 1B2)
  45. I/O1B3 (Input/Output 1B3)
  46. GND (Ground)
  47. I/O1B4 (Input/Output 1B4)
  48. I/O1B5 (Input/Output 1B5)
  49. I/O1B6 (Input/Output 1B6)
  50. I/O1B7 (Input/Output 1B7)
  51. I/O1B8 (Input/Output 1B8)
  52. I/O1B9 (Input/Output 1B9)
  53. I/O1B10 (Input/Output 1B10)
  54. I/O1B11 (Input/Output 1B11)
  55. I/O1B12 (Input/Output 1B12)

技術ソリューションにおける SN74ABT16501DLR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of SN74ABT16501DLR in technical solutions:

  1. Q: What is SN74ABT16501DLR? A: SN74ABT16501DLR is a 16-bit universal bus transceiver with 3-state outputs, designed for asynchronous communication between data buses.

  2. Q: What is the operating voltage range of SN74ABT16501DLR? A: The operating voltage range of SN74ABT16501DLR is typically between 4.5V and 5.5V.

  3. Q: What is the maximum data transfer rate supported by SN74ABT16501DLR? A: SN74ABT16501DLR supports a maximum data transfer rate of 200 MHz.

  4. Q: Can SN74ABT16501DLR be used as a level shifter? A: Yes, SN74ABT16501DLR can be used as a level shifter to convert signals between different voltage levels.

  5. Q: How many input/output pins does SN74ABT16501DLR have? A: SN74ABT16501DLR has 16 input/output pins, allowing bidirectional data transfer.

  6. Q: Does SN74ABT16501DLR support hot insertion? A: Yes, SN74ABT16501DLR supports hot insertion, which means it can be inserted or removed from a live circuit without causing damage.

  7. Q: Can SN74ABT16501DLR be used in high-speed applications? A: Yes, SN74ABT16501DLR is designed for high-speed operation and can be used in applications that require fast data transfer.

  8. Q: What is the power supply current consumption of SN74ABT16501DLR? A: The power supply current consumption of SN74ABT16501DLR is typically around 20 mA.

  9. Q: Can SN74ABT16501DLR be used in automotive applications? A: Yes, SN74ABT16501DLR is qualified for automotive applications and can withstand the harsh conditions found in automotive environments.

  10. Q: Are there any specific layout considerations for using SN74ABT16501DLR? A: Yes, it is recommended to follow the layout guidelines provided in the datasheet to ensure proper signal integrity and minimize noise coupling.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always advisable to refer to the datasheet and consult with technical experts for accurate information.