Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SN74AS298ANSR
詳細を表示 DataSheets

SN74AS298ANSR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Shift Register
  • Characteristics:
    • High-speed operation
    • Wide operating voltage range
    • Low power consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Serial-to-Parallel Data Conversion
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Output Current: ±6mA
  • Propagation Delay Time: 15ns (typical)
  • Maximum Clock Frequency: 25MHz

Detailed Pin Configuration

The SN74AS298ANSR has a 16-pin SOIC package with the following pin configuration:

  1. CLR (Clear)
  2. CLK (Clock)
  3. D (Serial Data Input)
  4. Q0 (Parallel Data Output)
  5. Q1 (Parallel Data Output)
  6. Q2 (Parallel Data Output)
  7. Q3 (Parallel Data Output)
  8. GND (Ground)
  9. Q4 (Parallel Data Output)
  10. Q5 (Parallel Data Output)
  11. Q6 (Parallel Data Output)
  12. Q7 (Parallel Data Output)
  13. SER (Serial Data Output)
  14. OE (Output Enable)
  15. VCC (Supply Voltage)
  16. NC (No Connection)

Functional Features

  • Serial-to-parallel data conversion
  • Clear function for resetting the register
  • Output enable control for tri-state outputs
  • High-speed operation for efficient data transfer
  • Wide operating voltage range for compatibility with various systems
  • Low power consumption for energy efficiency

Advantages and Disadvantages

Advantages: - High-speed operation allows for quick data processing - Wide operating voltage range ensures compatibility with different systems - Low power consumption reduces energy usage

Disadvantages: - Limited number of parallel outputs (8 in total) - Propagation delay time may affect real-time applications

Working Principles

The SN74AS298ANSR is a logic shift register that converts serial input data into parallel output data. It operates based on clock signals and stores the incoming serial data until it is shifted out in parallel form. The clear function resets the register, while the output enable control allows for tri-state outputs.

Detailed Application Field Plans

The SN74AS298ANSR can be used in various applications, including: 1. Data communication systems 2. Digital signal processing 3. Microcontroller-based systems 4. Industrial automation 5. Robotics 6. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the SN74AS298ANSR include: 1. CD4015BE - CMOS Dual 4-Stage Static Shift Register 2. 74HC595 - 8-Bit Serial-In, Parallel-Out Shift Register 3. CD4021BE - CMOS 8-Stage Static Shift Register 4. 74LS164 - 8-Bit Serial-In, Parallel-Out Shift Register 5. CD4094BE - CMOS 8-Stage Shift-and-Store Bus Register

These alternative models offer similar functionality and can be considered as replacements for the SN74AS298ANSR depending on specific requirements.

(Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.)

技術ソリューションにおける SN74AS298ANSR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of SN74AS298ANSR:

  1. Q: What is SN74AS298ANSR? A: SN74AS298ANSR is a specific model number for a quad 2-input multiplexer IC (integrated circuit) manufactured by Texas Instruments.

  2. Q: What is the purpose of SN74AS298ANSR? A: The purpose of SN74AS298ANSR is to provide a digital logic solution for multiplexing multiple input signals onto a single output line.

  3. Q: How many inputs can SN74AS298ANSR handle? A: SN74AS298ANSR can handle up to four input signals, as it is a quad (four-channel) multiplexer.

  4. Q: What is the voltage range supported by SN74AS298ANSR? A: SN74AS298ANSR supports a voltage range of 4.5V to 5.5V.

  5. Q: What is the maximum operating frequency of SN74AS298ANSR? A: The maximum operating frequency of SN74AS298ANSR is typically around 25 MHz.

  6. Q: Can SN74AS298ANSR be used in both digital and analog applications? A: No, SN74AS298ANSR is designed specifically for digital applications and is not suitable for analog signals.

  7. Q: What is the power consumption of SN74AS298ANSR? A: The power consumption of SN74AS298ANSR depends on various factors, but it typically falls within the range of a few milliwatts.

  8. Q: Does SN74AS298ANSR have any built-in protection features? A: SN74AS298ANSR does not have built-in protection features, so external measures may be required to protect against voltage spikes or ESD (electrostatic discharge).

  9. Q: Can SN74AS298ANSR be used in high-speed applications? A: Yes, SN74AS298ANSR is designed to operate at relatively high speeds and can be used in various high-speed digital applications.

  10. Q: Are there any specific precautions to consider when using SN74AS298ANSR? A: It is important to follow the manufacturer's datasheet and guidelines for proper usage, including considerations for power supply decoupling, signal integrity, and temperature limitations.

Please note that these answers are general and may vary depending on the specific application and requirements. Always refer to the manufacturer's documentation for accurate and up-to-date information.