Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
THS4082IDGN
詳細を表示 DataSheets

THS4082IDGN

Product Overview

Category

The THS4082IDGN belongs to the category of high-speed operational amplifiers.

Use

It is used for high-speed signal processing and amplification in various electronic applications.

Characteristics

  • High-speed performance
  • Low distortion
  • Wide bandwidth
  • Low noise

Package

The THS4082IDGN comes in a standard IC package.

Essence

This operational amplifier is essential for applications requiring high-speed and low-distortion signal amplification.

Packaging/Quantity

The THS4082IDGN is typically packaged in reels and is available in varying quantities depending on the supplier.

Specifications

  • Supply Voltage: ±5V to ±15V
  • Bandwidth: 1.1GHz
  • Slew Rate: 2200V/µs
  • Input Noise Voltage: 1.9nV/√Hz
  • Input Bias Current: 2.5µA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The THS4082IDGN has a standard pin configuration with two inputs, one output, and power supply pins. The detailed pin configuration can be found in the product datasheet.

Functional Features

  • High-speed signal processing
  • Low distortion amplification
  • Wide bandwidth for signal fidelity
  • Low noise for accurate signal reproduction

Advantages and Disadvantages

Advantages

  • High-speed performance suitable for demanding applications
  • Low distortion for accurate signal representation
  • Wide bandwidth enables faithful signal reproduction

Disadvantages

  • Higher power consumption compared to lower speed operational amplifiers
  • More sensitive to layout and external interference due to high-speed operation

Working Principles

The THS4082IDGN operates based on the principles of high-speed amplification, utilizing advanced circuitry to achieve low distortion and wide bandwidth performance.

Detailed Application Field Plans

The THS4082IDGN is well-suited for the following applications: - High-speed data acquisition systems - Instrumentation and measurement equipment - Communication systems - Radar and sonar systems - Test and measurement equipment

Detailed and Complete Alternative Models

Some alternative models to the THS4082IDGN include: - AD8000 from Analog Devices - LMH6554 from Texas Instruments - ADA4898 from Analog Devices

In conclusion, the THS4082IDGN is a high-speed operational amplifier designed for applications that require low distortion and wide bandwidth performance. Its characteristics make it suitable for a range of high-speed electronic systems and signal processing applications.

[Word Count: 366]

技術ソリューションにおける THS4082IDGN の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the THS4082IDGN?

    • The THS4082IDGN is a high-speed operational amplifier designed for applications requiring wide bandwidth and high slew rate.

  2. What is the typical supply voltage range for THS4082IDGN?

    • The typical supply voltage range for THS4082IDGN is ±5V to ±15V.

  3. What is the input voltage noise of THS4082IDGN?

    • The input voltage noise of THS4082IDGN is typically 6.5nV/√Hz at 1kHz.

  4. What is the bandwidth of THS4082IDGN?

    • The bandwidth of THS4082IDGN is typically 220MHz.

  5. What are the typical applications of THS4082IDGN?

    • Typical applications of THS4082IDGN include active filters, ADC drivers, and high-speed signal processing.

  6. What is the output current capability of THS4082IDGN?

    • The output current capability of THS4082IDGN is typically ±60mA.

  7. What is the input bias current of THS4082IDGN?

    • The input bias current of THS4082IDGN is typically 1.5µA.

  8. What is the temperature range for THS4082IDGN?

    • The temperature range for THS4082IDGN is typically -40°C to 125°C.

  9. Does THS4082IDGN require external compensation?

    • Yes, THS4082IDGN requires external compensation for stability.

  10. Is THS4082IDGN suitable for low-power applications?

    • No, THS4082IDGN is not specifically designed for low-power applications due to its high-speed performance characteristics.