Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TL082CMX/NOPB
詳細を表示 DataSheets

TL082CMX/NOPB

Product Overview

Category

The TL082CMX/NOPB belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used as a general-purpose operational amplifier for various analog applications.

Characteristics

  • Low input bias current
  • High slew rate
  • Low noise
  • Wide bandwidth

Package

The TL082CMX/NOPB is available in a small outline package (SOIC) and comes in tube or tape and reel packaging.

Essence

The essence of the TL082CMX/NOPB lies in its versatile application in audio, industrial, and automotive systems due to its high performance and low power consumption.

Packaging/Quantity

The TL082CMX/NOPB is typically packaged in tubes or reels with varying quantities depending on the manufacturer.

Specifications

  • Supply Voltage: ±3 V to ±22 V
  • Input Offset Voltage: 3 mV max
  • Input Bias Current: 30 pA max
  • Slew Rate: 16 V/µs
  • Bandwidth: 4 MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TL082CMX/NOPB has 8 pins arranged in a dual in-line package (DIP). The pin configuration is as follows: 1. Offset Null 2. Inverting Input 3. Non-Inverting Input 4. V- 5. Offset Null 6. Output 7. V+ 8. NC (Not Connected)

Functional Features

The TL082CMX/NOPB offers the following functional features: - High input impedance - Low distortion - Rail-to-rail output swing capability - Short-circuit protection

Advantages and Disadvantages

Advantages

  • Versatile application in various analog circuits
  • Low noise and high slew rate
  • Wide operating voltage range

Disadvantages

  • Limited output current capability
  • Susceptible to electromagnetic interference in certain environments

Working Principles

The TL082CMX/NOPB operates based on the principles of differential amplification and feedback control, allowing it to amplify small signals with high precision and low distortion.

Detailed Application Field Plans

The TL082CMX/NOPB finds extensive use in the following application fields: - Audio amplifiers - Instrumentation amplifiers - Active filters - Signal conditioning circuits - Sensor interfaces

Detailed and Complete Alternative Models

Some alternative models to the TL082CMX/NOPB include: - LM358 - OP07 - NE5532 - AD822

In conclusion, the TL082CMX/NOPB is a versatile operational amplifier with a wide range of applications in analog circuit design, offering high performance and reliability.

Word Count: 410

技術ソリューションにおける TL082CMX/NOPB の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the TL082CMX/NOPB?
    The TL082CMX/NOPB is a dual JFET-input operational amplifier that offers low input bias and offset currents.

  2. What are the typical applications of the TL082CMX/NOPB?
    The TL082CMX/NOPB is commonly used in audio preamplifiers, active filters, and instrumentation amplifiers.

  3. What is the supply voltage range for TL082CMX/NOPB?
    The TL082CMX/NOPB operates with a supply voltage range of ±3V to ±22V.

  4. What is the input offset voltage of TL082CMX/NOPB?
    The input offset voltage of TL082CMX/NOPB is typically 3 mV.

  5. What is the input bias current of TL082CMX/NOPB?
    The input bias current of TL082CMX/NOPB is typically 30 pA.

  6. Can TL082CMX/NOPB be used in single-supply applications?
    Yes, TL082CMX/NOPB can be used in single-supply applications with proper biasing.

  7. What is the bandwidth of TL082CMX/NOPB?
    The bandwidth of TL082CMX/NOPB is typically 3 MHz.

  8. Is TL082CMX/NOPB suitable for precision applications?
    TL082CMX/NOPB is not recommended for precision applications due to its relatively high input offset voltage and bias current.

  9. Can TL082CMX/NOPB operate at high temperatures?
    TL082CMX/NOPB has a wide temperature range and can operate at high temperatures up to 125°C.

  10. What are some common alternatives to TL082CMX/NOPB?
    Common alternatives to TL082CMX/NOPB include TL072, LM358, and OP07 operational amplifiers.