画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TL974ID

TL974ID

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics:
    • High gain and bandwidth
    • Low input offset voltage
    • Low power consumption
  • Package: Dual Inline Package (DIP)
  • Essence: Analog signal processing
  • Packaging/Quantity: Typically sold in packs of 10 or 25 units

Specifications

  • Supply Voltage: ±5V to ±18V
  • Input Offset Voltage: 1mV (maximum)
  • Input Bias Current: 20nA (maximum)
  • Input Offset Current: 2nA (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Slew Rate: 0.5V/µs (typical)
  • Output Current: 40mA (maximum)

Detailed Pin Configuration

The TL974ID has a total of 8 pins, numbered as follows:

```


| | --| V+ OUT |-- Pin 1 --| IN- V- |-- Pin 2 --| IN+ NC |-- Pin 3 --| NC IN+ |-- Pin 4 --| V- IN- |-- Pin 5 --| OUT V+ |-- Pin 6 --| NC NC |-- Pin 7 |___________| ```

Functional Features

  • High precision amplification of analog signals
  • Wide range of operating voltages
  • Low noise and distortion
  • Stable performance over temperature variations
  • Short-circuit protection

Advantages

  • High gain and bandwidth allow for accurate signal amplification
  • Low input offset voltage ensures minimal error in signal processing
  • Low power consumption results in energy-efficient operation
  • Stable performance over temperature variations ensures reliability

Disadvantages

  • Limited output current may restrict certain applications
  • Not suitable for high-frequency signal amplification

Working Principles

The TL974ID is an operational amplifier that utilizes differential input to amplify analog signals. It consists of multiple transistors and resistors configured in a way that allows for precise amplification and processing of input signals.

Detailed Application Field Plans

The TL974ID is commonly used in various applications, including: 1. Audio amplification circuits 2. Signal conditioning circuits 3. Sensor interfaces 4. Active filters 5. Voltage regulators

Detailed and Complete Alternative Models

  1. LM324: Similar specifications and pin configuration
  2. TL071: Higher gain bandwidth product, but different pin configuration
  3. OP07: Lower input offset voltage, but different package type

Please note that the above list is not exhaustive, and there are several other alternative models available in the market.

Word count: 305 words

技術ソリューションにおける TL974ID の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TL974ID in technical solutions:

  1. Q: What is TL974ID? A: TL974ID is a specific model of operational amplifier (op-amp) commonly used in electronic circuits.

  2. Q: What are the key features of TL974ID? A: TL974ID features low input offset voltage, low noise, high slew rate, wide bandwidth, and low power consumption.

  3. Q: What is the typical voltage supply range for TL974ID? A: The typical voltage supply range for TL974ID is between ±2.5V and ±18V.

  4. Q: Can TL974ID be used in single-supply applications? A: Yes, TL974ID can be used in both dual-supply and single-supply applications.

  5. Q: What is the maximum output current of TL974ID? A: The maximum output current of TL974ID is typically around 40mA.

  6. Q: Is TL974ID suitable for audio applications? A: Yes, TL974ID is commonly used in audio applications due to its low noise and high bandwidth characteristics.

  7. Q: Can TL974ID operate at high temperatures? A: Yes, TL974ID has a wide operating temperature range, typically from -40°C to +125°C.

  8. Q: What is the input bias current of TL974ID? A: The input bias current of TL974ID is typically very low, around 20nA.

  9. Q: Can TL974ID be used in precision measurement circuits? A: Yes, TL974ID is suitable for precision measurement circuits due to its low input offset voltage and low drift.

  10. Q: Are there any recommended applications for TL974ID? A: TL974ID is commonly used in instrumentation amplifiers, active filters, audio preamplifiers, and other precision circuits.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.