Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLC2274AIPWR
詳細を表示 DataSheets

TLC2274AIPWR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Input/Output, Quad Operational Amplifier
  • Package: TSSOP-14
  • Essence: High-performance operational amplifier with low power consumption and versatile input/output range
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2.7V to 16V
  • Input Offset Voltage: 500µV (maximum)
  • Input Bias Current: 1pA (typical)
  • Gain Bandwidth Product: 2.2MHz (typical)
  • Slew Rate: 1.3V/µs (typical)
  • Output Current: ±20mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLC2274AIPWR has a TSSOP-14 package with the following pin configuration:

___________ VCC | 1 14 | OUT A IN+ A | 2 13 | IN- D IN- A | 3 12 | OUT D OUT B | 4 11 | IN+ D IN+ B | 5 10 | IN- C IN- B | 6 9 | OUT C OUT C | 7 8 | IN+ C ‾‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • Low-power consumption allows for extended battery life in portable devices.
  • Rail-to-Rail input/output capability enables operation at the full supply voltage range.
  • Quad operational amplifier provides four independent amplifiers in a single package.
  • Wide operating temperature range allows for use in various environmental conditions.
  • High gain bandwidth product and fast slew rate ensure accurate and responsive signal amplification.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life. - Rail-to-Rail input/output enables versatile operation. - Quad operational amplifier saves space and cost. - Wide operating temperature range ensures reliability in different environments. - High gain bandwidth product and fast slew rate provide accurate and responsive amplification.

Disadvantages: - Limited output current may not be suitable for high-power applications. - TSSOP-14 package may require careful handling during assembly.

Working Principles

The TLC2274AIPWR is an operational amplifier that amplifies the difference between its two input voltages. It operates on a wide supply voltage range of 2.7V to 16V, making it suitable for various applications. The rail-to-rail input/output capability allows the amplifier to accept and produce signals close to the supply voltage limits, maximizing the dynamic range. The low-power design ensures efficient operation, making it ideal for battery-powered devices.

Detailed Application Field Plans

The TLC2274AIPWR is commonly used in the following applications:

  1. Portable Audio Devices: The low-power consumption and rail-to-rail input/output range make it suitable for audio amplification in portable music players and headphones.
  2. Sensor Signal Conditioning: The high gain bandwidth product and low offset voltage make it ideal for amplifying and conditioning small sensor signals in industrial and automotive applications.
  3. Battery-Powered Systems: The low-power design extends battery life in devices such as wireless sensors, remote controls, and medical instruments.
  4. Active Filters: The quad operational amplifier configuration allows for the implementation of active filters with multiple filter stages in a compact form factor.

Detailed and Complete Alternative Models

Some alternative models to the TLC2274AIPWR include:

  1. LM324: Quad operational amplifier with similar characteristics and pin configuration.
  2. MCP6004: Low-power, rail-to-rail input/output quad operational amplifier in a different package.
  3. TLV2464: Rail-to-Rail input/output quad operational amplifier with higher gain bandwidth product.

These alternative models offer similar functionality and can be considered based on specific application requirements.

(Note: The word count of this response is 408 words)

技術ソリューションにおける TLC2274AIPWR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLC2274AIPWR:

  1. Question: What is the operating voltage range of TLC2274AIPWR?
    Answer: The operating voltage range of TLC2274AIPWR is typically between 2.7V and 16V.

  2. Question: Can TLC2274AIPWR be used in single-supply applications?
    Answer: Yes, TLC2274AIPWR can be used in both single-supply and split-supply applications.

  3. Question: What is the maximum output current that TLC2274AIPWR can provide?
    Answer: TLC2274AIPWR can provide a maximum output current of 20mA per channel.

  4. Question: Is TLC2274AIPWR suitable for low-power applications?
    Answer: Yes, TLC2274AIPWR is designed for low-power applications and has a low quiescent current consumption.

  5. Question: Can TLC2274AIPWR operate at high temperatures?
    Answer: Yes, TLC2274AIPWR has a wide temperature range and can operate reliably at high temperatures up to 125°C.

  6. Question: Does TLC2274AIPWR have built-in ESD protection?
    Answer: Yes, TLC2274AIPWR has built-in electrostatic discharge (ESD) protection, making it more robust against static electricity.

  7. Question: Can TLC2274AIPWR be used in audio applications?
    Answer: Yes, TLC2274AIPWR is suitable for audio applications due to its low noise and high slew rate.

  8. Question: What is the typical gain bandwidth product of TLC2274AIPWR?
    Answer: The typical gain bandwidth product of TLC2274AIPWR is 2.2MHz.

  9. Question: Can TLC2274AIPWR be used in battery-powered devices?
    Answer: Yes, TLC2274AIPWR's low power consumption makes it suitable for battery-powered devices.

  10. Question: Is TLC2274AIPWR available in a surface-mount package?
    Answer: Yes, TLC2274AIPWR is available in a surface-mount package (TSSOP-14) for easy integration into PCB designs.

Please note that these answers are general and may vary depending on specific application requirements.