Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLC27M4CN
詳細を表示 DataSheets

TLC27M4CN

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, precision, quad operational amplifier
  • Package: DIP-14 (Dual In-line Package with 14 pins)
  • Essence: The TLC27M4CN is a low-power, precision quad operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: Available in tubes or reels, with 25 pieces per tube/reel.

Specifications

  • Supply Voltage: ±2V to ±18V
  • Input Offset Voltage: 1mV (maximum)
  • Input Bias Current: 20nA (maximum)
  • Input Offset Current: 2nA (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Slew Rate: 0.6V/µs (typical)
  • Input Common Mode Voltage Range: -0.3V to VCC+0.3V
  • Output Voltage Swing: -Vs+1.5V to VCC-1.5V

Pin Configuration

The TLC27M4CN has a DIP-14 package with the following pin configuration:

__ __ OUT1 | 1 14 | VCC+ OUT2 | 2 13 | IN4- OUT3 | 3 12 | IN4+ OUT4 | 4 11 | IN3- IN1- | 5 10 | IN3+ IN1+ | 6 9 | IN2- VCC- | 7 8 | IN2+ ¯¯ ¯¯

Functional Features

  • Low power consumption: The TLC27M4CN operates at a low supply voltage and consumes minimal power, making it suitable for battery-powered applications.
  • Precision: It offers high accuracy and stability in amplification, ensuring precise signal processing.
  • Quad operational amplifier: The IC contains four independent operational amplifiers in a single package, providing flexibility in circuit design.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life in portable devices. - High precision ensures accurate signal amplification. - Quad package saves board space and reduces component count.

Disadvantages: - Limited gain bandwidth product may restrict its use in high-frequency applications. - Input common mode voltage range is not rail-to-rail, which may limit its suitability for certain applications.

Working Principles

The TLC27M4CN is based on the operational amplifier (op-amp) principle. It amplifies the difference between two input voltages and produces an output voltage proportional to this difference. The op-amp's internal circuitry consists of transistors, resistors, and capacitors that enable amplification and signal processing.

Application Field Plans

The TLC27M4CN finds applications in various fields, including: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Signal filtering and amplification in industrial control systems 4. Battery-powered instrumentation 5. Active filters and equalizers in audio systems

Alternative Models

Other alternative models with similar characteristics and functionality to the TLC27M4CN include: - LM324 - TL084 - OP07 - MCP6004

These alternatives can be considered based on specific application requirements and availability.

Word Count: 314 words

技術ソリューションにおける TLC27M4CN の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLC27M4CN in technical solutions:

  1. Question: What is the TLC27M4CN?
    Answer: The TLC27M4CN is a precision operational amplifier (op-amp) that is commonly used in various technical applications.

  2. Question: What is the voltage supply range for the TLC27M4CN?
    Answer: The TLC27M4CN operates on a voltage supply range of ±2V to ±18V.

  3. Question: What is the typical input offset voltage of the TLC27M4CN?
    Answer: The typical input offset voltage of the TLC27M4CN is 300µV.

  4. Question: Can the TLC27M4CN be used in low-power applications?
    Answer: Yes, the TLC27M4CN is designed for low-power operation, making it suitable for battery-powered devices.

  5. Question: What is the maximum output current of the TLC27M4CN?
    Answer: The TLC27M4CN can provide a maximum output current of 40mA.

  6. Question: Is the TLC27M4CN suitable for high-precision applications?
    Answer: Yes, the TLC27M4CN offers high precision with low input offset voltage and low input bias current, making it suitable for high-precision applications.

  7. Question: Can the TLC27M4CN operate in harsh environments?
    Answer: The TLC27M4CN has a wide operating temperature range of -40°C to +125°C, allowing it to function in harsh environments.

  8. Question: Does the TLC27M4CN have built-in protection features?
    Answer: Yes, the TLC27M4CN includes built-in protection features such as short-circuit protection and thermal shutdown.

  9. Question: Can the TLC27M4CN be used in audio applications?
    Answer: Yes, the TLC27M4CN can be used in audio applications due to its low noise and high gain bandwidth product.

  10. Question: What is the package type of the TLC27M4CN?
    Answer: The TLC27M4CN is available in a standard 14-pin DIP (Dual Inline Package) or SOIC (Small Outline Integrated Circuit) package.

Please note that these answers are general and may vary depending on specific application requirements.