Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLE2081IDG4
詳細を表示 DataSheets

TLE2081IDG4

Product Overview

Category

TLE2081IDG4 belongs to the category of operational amplifiers (op-amps).

Use

This product is commonly used in various electronic circuits where amplification of signals is required.

Characteristics

  • High gain: The TLE2081IDG4 offers a high voltage gain, making it suitable for applications requiring signal amplification.
  • Low noise: It has low input and output noise levels, ensuring accurate signal processing.
  • Wide bandwidth: This op-amp provides a wide frequency response, allowing it to handle a broad range of signals.
  • Low power consumption: The TLE2081IDG4 operates with low power requirements, making it energy-efficient.
  • Rail-to-rail inputs and outputs: It supports input and output signals that can swing close to the supply rails.

Package

The TLE2081IDG4 is available in a small outline package (SOP) with eight pins.

Essence

The essence of TLE2081IDG4 lies in its ability to amplify weak signals accurately and efficiently.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying depending on customer requirements.

Specifications

  • Supply voltage: ±2.5V to ±18V
  • Input offset voltage: 0.5mV (maximum)
  • Input bias current: 10nA (maximum)
  • Gain bandwidth product: 8MHz (typical)
  • Slew rate: 13V/µs (typical)
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

The TLE2081IDG4 has the following pin configuration:

  1. V- (Negative power supply)
  2. IN- (Inverting input)
  3. IN+ (Non-inverting input)
  4. V+ (Positive power supply)
  5. OUT (Output)
  6. NC (No connection)
  7. NC (No connection)
  8. VCC- (Negative power supply)

Functional Features

  • High voltage gain: The TLE2081IDG4 offers a high open-loop voltage gain, allowing for precise signal amplification.
  • Low input and output noise: This op-amp ensures minimal noise interference during signal processing.
  • Wide bandwidth: It can handle a wide range of frequencies, making it suitable for various applications.
  • Rail-to-rail inputs and outputs: The TLE2081IDG4 supports input and output signals that can swing close to the supply rails, maximizing dynamic range.

Advantages and Disadvantages

Advantages

  • High gain allows for accurate signal amplification.
  • Low noise levels ensure signal integrity.
  • Wide bandwidth enables versatile application usage.
  • Low power consumption makes it energy-efficient.
  • Rail-to-rail inputs and outputs maximize dynamic range.

Disadvantages

  • Limited availability in certain markets.
  • Relatively higher cost compared to some alternative models.

Working Principles

The TLE2081IDG4 operates based on the principles of differential amplification. It amplifies the voltage difference between its inverting and non-inverting inputs, producing an amplified output signal.

Detailed Application Field Plans

The TLE2081IDG4 finds applications in various fields, including: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Active filters 4. Instrumentation amplifiers 5. Data acquisition systems

Detailed and Complete Alternative Models

Some alternative models to the TLE2081IDG4 include: - LM358 - TL071 - AD822

These alternatives offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 411 words

技術ソリューションにおける TLE2081IDG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLE2081IDG4 in technical solutions:

Q1: What is TLE2081IDG4? A1: TLE2081IDG4 is a high-speed operational amplifier (op-amp) designed for various applications, including signal conditioning, filtering, and amplification.

Q2: What is the voltage supply range for TLE2081IDG4? A2: The voltage supply range for TLE2081IDG4 is typically between ±2.5V and ±18V.

Q3: What is the bandwidth of TLE2081IDG4? A3: TLE2081IDG4 has a bandwidth of typically 8 MHz.

Q4: Can TLE2081IDG4 operate with a single power supply? A4: Yes, TLE2081IDG4 can operate with a single power supply as long as it is within the specified voltage range.

Q5: What is the input offset voltage of TLE2081IDG4? A5: The input offset voltage of TLE2081IDG4 is typically around 500 µV.

Q6: Is TLE2081IDG4 suitable for low-noise applications? A6: Yes, TLE2081IDG4 is designed to have low noise characteristics, making it suitable for low-noise applications.

Q7: Can TLE2081IDG4 drive capacitive loads? A7: Yes, TLE2081IDG4 can drive capacitive loads up to a certain limit. It is recommended to refer to the datasheet for specific details.

Q8: Does TLE2081IDG4 have short-circuit protection? A8: Yes, TLE2081IDG4 has built-in short-circuit protection to prevent damage in case of a short circuit at the output.

Q9: What is the temperature range for TLE2081IDG4? A9: TLE2081IDG4 can operate within a temperature range of typically -40°C to +125°C.

Q10: Can TLE2081IDG4 be used in battery-powered applications? A10: Yes, TLE2081IDG4 can be used in battery-powered applications due to its low power consumption and wide voltage supply range.

Please note that these answers are general and it's always recommended to refer to the datasheet and consult with the manufacturer for specific application requirements.