Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLV2462CDG4
詳細を表示 DataSheets

TLV2462CDG4

Product Overview

Category

The TLV2462CDG4 belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used as a general-purpose op-amp in various electronic circuits and systems.

Characteristics

  • Low noise
  • Low offset voltage
  • Rail-to-rail output
  • Low power consumption

Package

The TLV2462CDG4 is available in a small-outline IC (SOIC) package.

Essence

This op-amp is essential for precision signal processing and amplification in electronic devices.

Packaging/Quantity

It is typically packaged in reels with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: ±1.35 V to ±6 V
  • Input Offset Voltage: 300 µV (max)
  • Input Bias Current: 1 pA (typ)
  • Gain Bandwidth Product: 2.8 MHz (typ)
  • Slew Rate: 1.4 V/µs (typ)

Detailed Pin Configuration

The TLV2462CDG4 has 8 pins, with pin 1 as the non-inverting input, pin 2 as the inverting input, pin 3 as the negative power supply, pin 4 as the output, pin 5 as the positive power supply, and pins 6, 7, and 8 as NC (no connection).

Functional Features

  • Low noise performance for precision applications
  • Rail-to-rail output swing for maximum dynamic range
  • Low power consumption for energy-efficient designs

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Wide operating voltage range
  • Small form factor

Disadvantages

  • Limited output current capability
  • Higher cost compared to general-purpose op-amps

Working Principles

The TLV2462CDG4 operates based on the principles of differential amplification and feedback control, allowing it to accurately amplify input signals while maintaining low noise and offset voltage.

Detailed Application Field Plans

The TLV2462CDG4 is widely used in: - Sensor interfaces - Data acquisition systems - Instrumentation amplifiers - Audio signal processing

Detailed and Complete Alternative Models

Some alternative models to the TLV2462CDG4 include: - LM358 - MCP6002 - AD822

In conclusion, the TLV2462CDG4 is a versatile operational amplifier with low noise, high precision, and wide application in various electronic systems and circuits.

[Word Count: 316]

技術ソリューションにおける TLV2462CDG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the TLV2462CDG4?

    • The TLV2462CDG4 is a dual operational amplifier with rail-to-rail input and output, designed for low-voltage, single-supply applications.

  2. What is the typical supply voltage range for TLV2462CDG4?

    • The typical supply voltage range for TLV2462CDG4 is 2.7V to 6V.

  3. What are the key features of TLV2462CDG4?

    • The key features include low noise, low offset voltage, low quiescent current, and rail-to-rail input and output operation.

  4. What are some common applications for TLV2462CDG4?

    • Common applications include sensor signal conditioning, battery-powered instrumentation, and audio amplification.

  5. What is the input bias current for TLV2462CDG4?

    • The input bias current is typically 1pA.

  6. What is the typical gain bandwidth product for TLV2462CDG4?

    • The typical gain bandwidth product is 2.8MHz.

  7. What is the temperature range for TLV2462CDG4?

    • The operating temperature range is -40°C to 125°C.

  8. What is the package type for TLV2462CDG4?

    • The TLV2462CDG4 is available in a small-outline IC (SOIC) package.

  9. What is the maximum output current for TLV2462CDG4?

    • The maximum output current is typically 50mA.

  10. Is the TLV2462CDG4 suitable for precision analog applications?

    • Yes, the TLV2462CDG4 is suitable for precision analog applications due to its low offset voltage and low noise characteristics.