Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLV2462CDGKR
詳細を表示 DataSheets

TLV2462CDGKR

Product Overview

Category

The TLV2462CDGKR belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used in electronic circuits for amplifying and processing analog signals.

Characteristics

  • Low noise
  • Low offset voltage
  • Rail-to-rail output
  • Low power consumption

Package

The TLV2462CDGKR comes in a small outline package (SOP) with 8 pins.

Essence

This op-amp is essential for precision signal conditioning and amplification in various electronic applications.

Packaging/Quantity

The TLV2462CDGKR is typically packaged in reels and available in quantities suitable for production runs.

Specifications

  • Supply Voltage: 2.7V to 6V
  • Input Offset Voltage: 300µV max
  • Gain Bandwidth Product: 2.8MHz
  • Slew Rate: 1.4V/µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TLV2462CDGKR has the following pin configuration: 1. OUT- 2. IN- 3. V- 4. V+ 5. IN+ 6. OUT+ 7. NC (No Connection) 8. VCC

Functional Features

  • High precision amplification
  • Wide operating voltage range
  • Low input bias current
  • EMI hardened

Advantages and Disadvantages

Advantages

  • Low noise and offset voltage
  • Rail-to-rail output
  • Suitable for low-power applications
  • Wide temperature range operation

Disadvantages

  • Limited output current capability
  • Higher cost compared to general-purpose op-amps

Working Principles

The TLV2462CDGKR operates by amplifying the difference between its two input terminals and providing an output that is proportional to this difference. It achieves this through the use of internal circuitry and feedback mechanisms.

Detailed Application Field Plans

The TLV2462CDGKR is widely used in: - Sensor signal conditioning - Portable instrumentation - Battery-powered systems - Audio amplification - Precision voltage/current measurement

Detailed and Complete Alternative Models

Some alternative models to the TLV2462CDGKR include: - LM358 - MCP6002 - AD8628

In conclusion, the TLV2462CDGKR is a versatile operational amplifier with low noise and high precision characteristics, making it suitable for a wide range of electronic applications.

[Word count: 366]

技術ソリューションにおける TLV2462CDGKR の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the TLV2462CDGKR?

    • The TLV2462CDGKR is a precision dual operational amplifier with low noise, high speed, and low input bias current.

  2. What are the typical applications of the TLV2462CDGKR?

    • The TLV2462CDGKR is commonly used in audio preamplifiers, active filters, instrumentation amplifiers, and sensor signal conditioning circuits.

  3. What is the supply voltage range for TLV2462CDGKR?

    • The TLV2462CDGKR operates from a single supply voltage range of 2.7V to 6V or a dual supply voltage range of ±1.35V to ±3V.

  4. What is the input offset voltage of TLV2462CDGKR?

    • The input offset voltage of TLV2462CDGKR is typically 150µV at room temperature.

  5. What is the bandwidth of TLV2462CDGKR?

    • The bandwidth of TLV2462CDGKR is typically 10MHz.

  6. What is the input bias current of TLV2462CDGKR?

    • The input bias current of TLV2462CDGKR is typically 0.2pA.

  7. Does TLV2462CDGKR have thermal shutdown protection?

    • Yes, TLV2462CDGKR has built-in thermal shutdown protection to prevent damage from excessive heat.

  8. Can TLV2462CDGKR be used in low-power applications?

    • Yes, TLV2462CDGKR is designed for low-power applications and has a low quiescent current of 500µA per channel.

  9. What is the package type of TLV2462CDGKR?

    • TLV2462CDGKR is available in a small 8-pin VSSOP package, making it suitable for space-constrained designs.

  10. Is TLV2462CDGKR RoHS compliant?

    • Yes, TLV2462CDGKR is RoHS compliant, meeting environmental standards for lead-free manufacturing.