TLV2464IDRG4
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-power, Rail-to-Rail Input/Output (RRIO), Quad Op-Amp
- Package: SOIC (Small Outline Integrated Circuit)
- Essence: The TLV2464IDRG4 is a low-power quad operational amplifier designed for general-purpose applications.
- Packaging/Quantity: The TLV2464IDRG4 comes in a 14-pin SOIC package and is typically sold in reels of 2500 units.
Specifications
- Supply Voltage Range: ±1.35 V to ±8 V
- Input Offset Voltage: 1 mV (maximum)
- Input Bias Current: 1 pA (typical)
- Gain Bandwidth Product: 2.8 MHz (typical)
- Slew Rate: 1.6 V/µs (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2464IDRG4 has a 14-pin SOIC package with the following pin configuration:
___________
Vcc | 1 14 | Vout1
Vin+| 2 13 | Vout2
Vin-| 3 12 | Vout3
Vcc | 4 11 | Vout4
Gnd | 5 10 | N/C
Vout| 6 9 | N/C
N/C | 7 8 | N/C
‾‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- Low-power consumption
- Rail-to-Rail Input/Output (RRIO) capability
- Quad operational amplifier in a single package
- Wide supply voltage range
- High gain bandwidth product
- Low input offset voltage and bias current
Advantages and Disadvantages
Advantages: - Low-power consumption makes it suitable for battery-powered applications. - RRIO capability allows the amplifier to operate with inputs and outputs that can swing close to the supply rails. - Quad op-amp configuration saves board space and simplifies circuit design.
Disadvantages: - Limited slew rate may not be suitable for high-speed applications. - The 14-pin SOIC package may not be ideal for space-constrained designs.
Working Principles
The TLV2464IDRG4 is an operational amplifier that amplifies the difference between its two input voltages. It operates on a wide supply voltage range and provides rail-to-rail input and output capabilities. The low-power consumption and high gain bandwidth product make it suitable for various general-purpose applications.
Detailed Application Field Plans
The TLV2464IDRG4 can be used in a wide range of applications, including but not limited to: - Audio amplification - Sensor signal conditioning - Active filters - Data acquisition systems - Battery-powered devices - Portable instrumentation
Detailed and Complete Alternative Models
Some alternative models to the TLV2464IDRG4 are: - LM324 - MCP6004 - AD8620 - MAX44246
These alternatives offer similar functionality and characteristics, allowing users to choose the most suitable option for their specific application.
Word count: 346 words
技術ソリューションにおける TLV2464IDRG4 の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of TLV2464IDRG4 in technical solutions:
Q: What is TLV2464IDRG4? A: TLV2464IDRG4 is a low-power, rail-to-rail input/output operational amplifier (op-amp) that is commonly used in various electronic applications.
Q: What is the supply voltage range for TLV2464IDRG4? A: The supply voltage range for TLV2464IDRG4 is typically between 2.7V and 16V.
Q: What is the input voltage range of TLV2464IDRG4? A: The input voltage range of TLV2464IDRG4 extends from the negative supply voltage (V-) to the positive supply voltage (V+).
Q: Can TLV2464IDRG4 operate with a single power supply? A: Yes, TLV2464IDRG4 can operate with a single power supply as long as it is within the specified supply voltage range.
Q: What is the typical gain bandwidth product of TLV2464IDRG4? A: The typical gain bandwidth product of TLV2464IDRG4 is around 3 MHz.
Q: Is TLV2464IDRG4 suitable for precision applications? A: TLV2464IDRG4 is not specifically designed for precision applications due to its moderate offset voltage and bias current specifications.
Q: Can TLV2464IDRG4 drive capacitive loads? A: Yes, TLV2464IDRG4 can drive capacitive loads up to a certain limit. However, it is recommended to use an external compensation capacitor for stability.
Q: What is the typical input bias current of TLV2464IDRG4? A: The typical input bias current of TLV2464IDRG4 is around 1 pA.
Q: Does TLV2464IDRG4 have built-in protection features? A: Yes, TLV2464IDRG4 has built-in electrostatic discharge (ESD) protection and short-circuit protection.
Q: Can TLV2464IDRG4 be used in low-power applications? A: Yes, TLV2464IDRG4 is designed for low-power operation, making it suitable for battery-powered or energy-efficient applications.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.