Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLV2470IDBVTG4
詳細を表示 DataSheets

TLV2470IDBVTG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Input/Output, Single-Supply, General Purpose
  • Package: SOT-23 (DBV)
  • Essence: The TLV2470IDBVTG4 is a low-power operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Supply Voltage: 2.7V to 12V
  • Input Offset Voltage: ±1mV (maximum)
  • Input Bias Current: ±1pA (typical)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 6V/µs (typical)
  • Quiescent Current: 900µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV2470IDBVTG4 has the following pin configuration:

___________ OUT | | VCC+ IN- | | IN+ IN+ | | NC GND |___________| OUT

Functional Features

  • Low input offset voltage and bias current for accurate signal processing.
  • Rail-to-rail input and output capability allows for maximum dynamic range.
  • Wide supply voltage range enables operation from a single supply.
  • Low quiescent current minimizes power consumption.

Advantages

  • High precision and accuracy in signal amplification and processing.
  • Versatile and suitable for various general-purpose applications.
  • Can operate from a single power supply, simplifying circuit design.
  • Low power consumption extends battery life in portable devices.

Disadvantages

  • Limited bandwidth compared to specialized amplifiers.
  • Not suitable for high-frequency applications.
  • May exhibit slight non-linearity at extreme input/output voltage levels.

Working Principles

The TLV2470IDBVTG4 is an operational amplifier that amplifies and processes analog signals. It operates by taking the difference between the voltages at its two input terminals (IN+ and IN-) and amplifying this difference to produce an output voltage. The rail-to-rail input and output capability allows the amplifier to handle signals that span the entire supply voltage range.

Detailed Application Field Plans

The TLV2470IDBVTG4 can be used in various applications, including:

  1. Signal conditioning and amplification in sensor interfaces.
  2. Active filters and equalizers in audio systems.
  3. Voltage and current measurement circuits.
  4. Portable medical devices requiring low power consumption.
  5. Battery-powered instrumentation and data acquisition systems.

Alternative Models

Here are some alternative models that can be considered as substitutes for the TLV2470IDBVTG4:

  1. LM324: General-purpose operational amplifier with similar characteristics.
  2. MCP6001: Low-power, rail-to-rail input/output operational amplifier.
  3. AD8605: Precision, low-power operational amplifier with rail-to-rail inputs/outputs.

These alternatives offer similar functionality and can be used depending on specific requirements.

In conclusion, the TLV2470IDBVTG4 is a versatile operational amplifier suitable for general-purpose applications. Its low-power consumption, rail-to-rail capabilities, and wide supply voltage range make it a popular choice in various fields. However, its limited bandwidth and non-linearity at extreme voltage levels should be considered when selecting this amplifier for specific applications.

技術ソリューションにおける TLV2470IDBVTG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLV2470IDBVTG4 in technical solutions:

  1. Q: What is TLV2470IDBVTG4? A: TLV2470IDBVTG4 is a low-power, rail-to-rail input/output operational amplifier (op-amp) manufactured by Texas Instruments.

  2. Q: What is the supply voltage range for TLV2470IDBVTG4? A: The supply voltage range for TLV2470IDBVTG4 is typically between 2.7V and 5.5V.

  3. Q: What is the typical gain bandwidth product of TLV2470IDBVTG4? A: The typical gain bandwidth product of TLV2470IDBVTG4 is 10 MHz.

  4. Q: Can TLV2470IDBVTG4 operate with a single power supply? A: Yes, TLV2470IDBVTG4 can operate with a single power supply as it has rail-to-rail input and output capabilities.

  5. Q: What is the input offset voltage of TLV2470IDBVTG4? A: The input offset voltage of TLV2470IDBVTG4 is typically around 1 mV.

  6. Q: Is TLV2470IDBVTG4 suitable for low-power applications? A: Yes, TLV2470IDBVTG4 is designed for low-power applications, making it suitable for battery-powered devices.

  7. Q: Can TLV2470IDBVTG4 drive capacitive loads? A: Yes, TLV2470IDBVTG4 has a high output current capability, allowing it to drive capacitive loads up to a certain limit.

  8. Q: What is the input common-mode voltage range of TLV2470IDBVTG4? A: The input common-mode voltage range of TLV2470IDBVTG4 extends from the negative supply rail to within 1.5V of the positive supply rail.

  9. Q: Does TLV2470IDBVTG4 have built-in protection features? A: Yes, TLV2470IDBVTG4 has built-in features like thermal shutdown and short-circuit protection to ensure safe operation.

  10. Q: Can TLV2470IDBVTG4 be used in precision applications? A: While TLV2470IDBVTG4 offers good performance, it may not be suitable for ultra-precision applications due to its moderate offset voltage and noise characteristics.

Please note that the answers provided here are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.