Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLV2762IDGKR
詳細を表示 DataSheets

TLV2762IDGKR

Product Overview

  • Category: Integrated Circuits (ICs)
  • Use: Operational Amplifiers (Op Amps)
  • Characteristics:
    • Low voltage, rail-to-rail input/output
    • Low power consumption
    • High speed performance
    • Wide supply voltage range
    • Small package size
  • Package: VSSOP-8
  • Essence: TLV2762IDGKR is a dual operational amplifier designed for low voltage applications.
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2.7V to 16V
  • Input Offset Voltage: ±1mV (maximum)
  • Input Bias Current: ±1pA (typical)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 6V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLV2762IDGKR has the following pin configuration:

___________ OUT+| | VCC+ OUT-| | IN+ IN-| | IN- VCC-| | OUT- |___________|

Functional Features

  • Low voltage operation allows for use in battery-powered devices.
  • Rail-to-rail input/output capability enables maximum dynamic range.
  • Low power consumption extends battery life.
  • High speed performance ensures accurate signal processing.
  • Wide supply voltage range provides flexibility in various applications.

Advantages and Disadvantages

Advantages: - Suitable for low voltage applications - Can operate with a wide range of supply voltages - Compact package size allows for space-saving designs - High speed performance ensures accurate signal processing

Disadvantages: - Limited to dual operational amplifier configuration - Not suitable for high voltage applications

Working Principles

The TLV2762IDGKR is based on a CMOS input stage and a rail-to-rail output stage. It operates by amplifying the difference between the voltages applied to its input pins, producing an amplified output signal. The low voltage operation and rail-to-rail capability make it ideal for applications where the input and output signals are close to the supply rails.

Detailed Application Field Plans

The TLV2762IDGKR is commonly used in various applications, including:

  1. Portable audio devices: Provides high-quality audio amplification with low power consumption.
  2. Sensor interfaces: Amplifies small sensor signals accurately for further processing.
  3. Battery-powered systems: Enables efficient signal conditioning and amplification in low voltage environments.
  4. Industrial control systems: Offers precise signal amplification for control and monitoring purposes.
  5. Medical equipment: Provides reliable amplification for medical sensors and instrumentation.

Detailed and Complete Alternative Models

  1. TLV272IDGKR: Single operational amplifier with similar characteristics and package.
  2. TLV274IDGKR: Quad operational amplifier with similar characteristics and package.
  3. TLV2772IDGKR: Dual operational amplifier with improved specifications and package options.

These alternative models offer similar functionality and can be considered as substitutes for the TLV2762IDGKR depending on specific requirements.

Word count: 445 words

技術ソリューションにおける TLV2762IDGKR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLV2762IDGKR:

  1. Q: What is TLV2762IDGKR? A: TLV2762IDGKR is a dual operational amplifier (op-amp) with rail-to-rail input/output capability, commonly used in various technical solutions.

  2. Q: What is the supply voltage range for TLV2762IDGKR? A: The supply voltage range for TLV2762IDGKR is typically between 2.7V and 5.5V.

  3. Q: What is the input offset voltage of TLV2762IDGKR? A: The input offset voltage of TLV2762IDGKR is typically around 500µV.

  4. Q: Can TLV2762IDGKR operate at high temperatures? A: Yes, TLV2762IDGKR has a wide temperature range and can operate reliably at temperatures up to 125°C.

  5. Q: What is the typical gain bandwidth product of TLV2762IDGKR? A: The typical gain bandwidth product of TLV2762IDGKR is around 2 MHz.

  6. Q: Is TLV2762IDGKR suitable for low-power applications? A: Yes, TLV2762IDGKR is designed for low-power operation and consumes very little power.

  7. Q: Can TLV2762IDGKR be used in single-supply applications? A: Yes, TLV2762IDGKR supports single-supply operation and can work with a wide range of voltages.

  8. Q: What is the input common-mode voltage range of TLV2762IDGKR? A: The input common-mode voltage range of TLV2762IDGKR extends from the negative supply voltage to within 1.5V of the positive supply voltage.

  9. Q: Does TLV2762IDGKR have built-in protection features? A: Yes, TLV2762IDGKR has built-in features like input/output rail-to-rail swing and electrostatic discharge (ESD) protection.

  10. Q: What are some typical applications for TLV2762IDGKR? A: TLV2762IDGKR is commonly used in battery-powered devices, sensor interfaces, signal conditioning circuits, and other low-power applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.