Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLV2762IDR
詳細を表示 DataSheets

TLV2762IDR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: High-speed, low-power, rail-to-rail input/output, dual-channel
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: TLV2762IDR is a dual-channel operational amplifier designed for high-speed and low-power applications. It offers rail-to-rail input and output capabilities, making it suitable for various signal conditioning tasks.
  • Packaging/Quantity: TLV2762IDR is available in a standard SOIC package with a quantity of 250 units per reel.

Specifications

  • Supply Voltage: 2.7V to 6V
  • Input Offset Voltage: ±1.5mV (maximum)
  • Input Bias Current: ±0.5pA (typical)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 6V/µs (typical)
  • Quiescent Current: 500µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLV2762IDR has a total of 8 pins arranged as follows:

___________ OUT+| | Vcc+ OUT-| | IN+ IN-| | IN- Vcc-| | OUT- GND|___________| OUT+

Functional Features

  • High-speed operation: The TLV2762IDR is capable of operating at a gain bandwidth product of 10MHz, enabling it to handle fast-changing signals effectively.
  • Low-power consumption: With a quiescent current of only 500µA, the TLV2762IDR is designed to minimize power consumption, making it suitable for battery-powered applications.
  • Rail-to-rail input/output: The operational amplifier can accept and deliver signals that are close to the supply voltage rails, allowing for maximum dynamic range in signal processing.

Advantages and Disadvantages

Advantages: - High-speed performance - Low-power consumption - Rail-to-rail input/output capability - Wide operating temperature range

Disadvantages: - Limited number of channels (dual-channel only) - Relatively high input offset voltage compared to some other models

Working Principles

The TLV2762IDR operates as a voltage amplifier, amplifying the difference between its two input terminals. It utilizes internal circuitry to provide high gain, low distortion, and accurate amplification of input signals. The rail-to-rail input/output feature allows it to handle signals that span the entire range between the supply voltage rails.

Detailed Application Field Plans

The TLV2762IDR is commonly used in various applications, including:

  1. Sensor signal conditioning: Amplifying and conditioning signals from sensors such as temperature sensors, pressure sensors, and light sensors.
  2. Audio amplification: Providing amplification for audio signals in portable devices, headphones, and audio systems.
  3. Data acquisition systems: Amplifying and processing analog signals in data acquisition systems for accurate measurement and conversion.

Detailed and Complete Alternative Models

  1. TLV272IDR: Single-channel operational amplifier with similar characteristics and package.
  2. TLV274IDR: Quad-channel operational amplifier with similar characteristics and package.
  3. LM358N: Dual-channel operational amplifier with different characteristics but compatible pin configuration.

(Note: This list is not exhaustive and there may be other alternative models available in the market.)

Word count: 411 words

技術ソリューションにおける TLV2762IDR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLV2762IDR in technical solutions:

  1. Q: What is TLV2762IDR? A: TLV2762IDR is a dual operational amplifier (op-amp) with rail-to-rail input/output capability, commonly used in various electronic applications.

  2. Q: What is the supply voltage range for TLV2762IDR? A: The supply voltage range for TLV2762IDR is typically between 2.7V and 6V.

  3. Q: What is the input offset voltage of TLV2762IDR? A: The input offset voltage of TLV2762IDR is typically around 1mV.

  4. Q: Can TLV2762IDR operate at high temperatures? A: Yes, TLV2762IDR has a wide temperature range and can operate reliably at temperatures up to 125°C.

  5. Q: What is the typical gain bandwidth product of TLV2762IDR? A: The typical gain bandwidth product of TLV2762IDR is around 2.8MHz.

  6. Q: Is TLV2762IDR suitable for low-power applications? A: Yes, TLV2762IDR is designed for low-power operation and has a low quiescent current consumption.

  7. Q: Can TLV2762IDR be used in single-supply applications? A: Yes, TLV2762IDR can be used in both single-supply and split-supply configurations.

  8. Q: What is the output voltage swing of TLV2762IDR? A: The output voltage swing of TLV2762IDR typically extends close to the supply rails.

  9. Q: Does TLV2762IDR have built-in protection features? A: Yes, TLV2762IDR has built-in features like short-circuit protection and thermal shutdown to ensure safe operation.

  10. Q: What are some common applications of TLV2762IDR? A: TLV2762IDR is commonly used in battery-powered devices, sensor interfaces, audio amplifiers, and other low-power precision applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.