Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLV27L1IDBVR
詳細を表示 DataSheets

TLV27L1IDBVR

Product Overview

Category

The TLV27L1IDBVR belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used as a general-purpose operational amplifier in various electronic circuits.

Characteristics

  • Low power consumption
  • Rail-to-rail output swing
  • Low input bias current
  • Wide supply voltage range

Package

The TLV27L1IDBVR comes in a small SOT-23 package, making it suitable for compact designs and space-constrained applications.

Essence

The essence of the TLV27L1IDBVR lies in its ability to provide high-performance amplification while consuming minimal power.

Packaging/Quantity

It is typically available in reels containing a specific quantity, such as 3000 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 16V
  • Input Offset Voltage: 500µV maximum
  • Gain Bandwidth Product: 1MHz
  • Operating Temperature Range: -40°C to 125°C
  • Slew Rate: 0.6V/µs

Detailed Pin Configuration

The TLV27L1IDBVR has a standard pin configuration with the following pins: 1. OUT: Output 2. V-: Negative Power Supply 3. IN-: Inverting Input 4. IN+: Non-Inverting Input 5. V+: Positive Power Supply

Functional Features

  • Low power consumption makes it suitable for battery-powered applications.
  • Rail-to-rail output swing allows for maximum output voltage range.
  • Low input bias current minimizes errors in precision applications.

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Wide supply voltage range
  • Small package size

Disadvantages

  • Limited gain bandwidth product compared to some higher-end op-amps
  • Slightly higher input offset voltage than certain precision op-amps

Working Principles

The TLV27L1IDBVR operates based on the principles of differential amplification, providing high gain and accurate signal processing within the specified supply voltage range.

Detailed Application Field Plans

The TLV27L1IDBVR is well-suited for various applications, including: - Battery-powered devices - Sensor signal conditioning - Portable instrumentation - Audio amplification

Detailed and Complete Alternative Models

Some alternative models to the TLV27L1IDBVR include: - LM358 - MCP6001 - TS912

In conclusion, the TLV27L1IDBVR offers a balance of low power consumption, wide supply voltage range, and compact packaging, making it an ideal choice for a wide range of electronic applications.

Word count: 411

技術ソリューションにおける TLV27L1IDBVR の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the TLV27L1IDBVR?

    • The TLV27L1IDBVR is a low-power operational amplifier designed for applications requiring low voltage and low power consumption.

  2. What is the typical supply voltage range for TLV27L1IDBVR?

    • The typical supply voltage range for TLV27L1IDBVR is 1.8V to 5.5V.

  3. What are the typical applications of TLV27L1IDBVR?

    • Typical applications include sensor signal conditioning, battery-powered instrumentation, and portable consumer electronics.

  4. What is the input offset voltage of TLV27L1IDBVR?

    • The input offset voltage is typically 300µV for TLV27L1IDBVR.

  5. What is the quiescent current consumption of TLV27L1IDBVR?

    • The quiescent current consumption is typically 19µA for TLV27L1IDBVR.

  6. What is the gain bandwidth product of TLV27L1IDBVR?

    • The gain bandwidth product is typically 180kHz for TLV27L1IDBVR.

  7. What is the operating temperature range for TLV27L1IDBVR?

    • The operating temperature range is typically -40°C to 125°C for TLV27L1IDBVR.

  8. Can TLV27L1IDBVR be used in single-supply applications?

    • Yes, TLV27L1IDBVR is designed to operate in single-supply applications.

  9. What is the package type for TLV27L1IDBVR?

    • TLV27L1IDBVR is available in the SOT-23 package.

  10. Is TLV27L1IDBVR RoHS compliant?

    • Yes, TLV27L1IDBVR is RoHS compliant, making it suitable for environmentally friendly designs.