Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLV341AIDBVR
詳細を表示 DataSheets

TLV341AIDBVR

Product Overview

Category: Integrated Circuits (ICs)

Use: TLV341AIDBVR is a low-power, rail-to-rail input/output operational amplifier. It is designed for general-purpose applications that require high precision and low power consumption.

Characteristics: - Low power consumption - Rail-to-rail input/output - High precision - General-purpose application

Package: SOT-23-5

Essence: TLV341AIDBVR is an essential component in electronic circuits that require amplification of signals with high precision and low power consumption.

Packaging/Quantity: TLV341AIDBVR is typically packaged in reels containing 3000 units.

Specifications

  • Supply Voltage Range: 2.7V to 6V
  • Input Offset Voltage: ±1mV
  • Gain Bandwidth Product: 1MHz
  • Input Bias Current: 1pA
  • Output Current: 50mA
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV341AIDBVR has the following pin configuration:

___________ OUT | 1 5 | VCC IN+ | 2 4 | GND IN- | 3_______|

Functional Features

  • Low quiescent current: The TLV341AIDBVR operates at a low supply current, making it suitable for battery-powered applications.
  • Rail-to-rail input/output: The operational amplifier can accept and deliver signals close to the supply voltage rails, allowing for maximum dynamic range.
  • High precision: With a low input offset voltage and high gain bandwidth product, the TLV341AIDBVR provides accurate amplification of signals.

Advantages and Disadvantages

Advantages: - Low power consumption - Rail-to-rail input/output capability - High precision amplification

Disadvantages: - Limited gain bandwidth product (1MHz) - Single-channel configuration

Working Principles

The TLV341AIDBVR is based on a differential amplifier architecture. It amplifies the voltage difference between its two input terminals, providing an amplified output signal. The rail-to-rail input/output capability allows for maximum utilization of the supply voltage range.

Detailed Application Field Plans

The TLV341AIDBVR can be used in various applications, including but not limited to: 1. Sensor signal conditioning 2. Portable medical devices 3. Battery-powered instrumentation 4. Audio amplification circuits 5. Industrial control systems

Detailed and Complete Alternative Models

  1. TLV341AIDCKR
  2. TLV341AIDCKRG4
  3. TLV341AIDCKT
  4. TLV341AIDCKTG4

These alternative models offer similar functionality and characteristics to the TLV341AIDBVR, providing options for different package types or temperature ranges.

In conclusion, the TLV341AIDBVR is a low-power operational amplifier with rail-to-rail input/output capability. Its high precision and low power consumption make it suitable for various general-purpose applications. With a compact SOT-23-5 package, it is widely used in sensor signal conditioning, portable medical devices, battery-powered instrumentation, audio amplification circuits, and industrial control systems.

技術ソリューションにおける TLV341AIDBVR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLV341AIDBVR in technical solutions:

  1. Question: What is TLV341AIDBVR?
    - Answer: TLV341AIDBVR is a low-power operational amplifier (op-amp) designed for general-purpose applications.

  2. Question: What is the supply voltage range for TLV341AIDBVR?
    - Answer: The supply voltage range for TLV341AIDBVR is typically between 2.7V and 5.5V.

  3. Question: What is the input voltage range for TLV341AIDBVR?
    - Answer: The input voltage range for TLV341AIDBVR extends from the negative supply voltage (V-) to the positive supply voltage (V+).

  4. Question: What is the typical gain bandwidth product (GBW) of TLV341AIDBVR?
    - Answer: The typical gain bandwidth product of TLV341AIDBVR is 1 MHz.

  5. Question: Can TLV341AIDBVR operate in single-supply configurations?
    - Answer: Yes, TLV341AIDBVR can operate in both single-supply and split-supply configurations.

  6. Question: What is the input bias current of TLV341AIDBVR?
    - Answer: The input bias current of TLV341AIDBVR is typically 1 pA.

  7. Question: Does TLV341AIDBVR have rail-to-rail input and output capability?
    - Answer: Yes, TLV341AIDBVR has rail-to-rail input and output capability, allowing it to handle signals close to the supply rails.

  8. Question: What is the maximum output current of TLV341AIDBVR?
    - Answer: The maximum output current of TLV341AIDBVR is typically 40 mA.

  9. Question: Can TLV341AIDBVR be used in low-power applications?
    - Answer: Yes, TLV341AIDBVR is designed for low-power applications and has a quiescent current of typically 500 µA.

  10. Question: What is the temperature range for TLV341AIDBVR?
    - Answer: TLV341AIDBVR can operate over a temperature range of -40°C to +125°C.

Please note that these answers are based on general information about TLV341AIDBVR and may vary depending on specific application requirements.