Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TM4C123GE6PMI
詳細を表示 DataSheets

TM4C123GE6PMI

Introduction

The TM4C123GE6PMI belongs to the family of microcontrollers and is specifically categorized as an ARM Cortex-M4F based microcontroller. This versatile product is widely used in various applications due to its advanced features and capabilities.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, industrial control systems
  • Characteristics: High performance, low power consumption, extensive peripheral integration
  • Package: LQFP (Low Profile Quad Flat Package)
  • Essence: The essence of TM4C123GE6PMI lies in its powerful ARM Cortex-M4F core and rich set of integrated peripherals.
  • Packaging/Quantity: Typically available in reels of 250 or 1000 units.

Specifications

  • Core: ARM Cortex-M4F
  • Clock Speed: Up to 80 MHz
  • Flash Memory: 256 KB
  • RAM: 32 KB
  • Operating Voltage: 1.8V to 3.6V
  • I/O Pins: 80
  • Communication Interfaces: UART, SPI, I2C, USB
  • Analog-to-Digital Converter (ADC): 12-bit, 2Msps

Detailed Pin Configuration

The detailed pin configuration of TM4C123GE6PMI can be found in the official datasheet provided by the manufacturer.

Functional Features

  • High Performance: The ARM Cortex-M4F core enables efficient processing of complex tasks.
  • Low Power Consumption: Optimized power management features make it suitable for battery-powered applications.
  • Rich Peripheral Integration: Integrated communication interfaces, ADC, PWM, and other peripherals simplify system design.

Advantages and Disadvantages

Advantages

  • Powerful processing capabilities
  • Extensive peripheral integration
  • Low power consumption

Disadvantages

  • Limited availability of alternative models with similar features
  • Higher cost compared to some entry-level microcontrollers

Working Principles

The TM4C123GE6PMI operates on the principle of executing instructions and processing data using its ARM Cortex-M4F core, while interacting with external components through its integrated peripherals.

Detailed Application Field Plans

  • Embedded Systems: Used in consumer electronics, home automation, and automotive systems.
  • IoT Devices: Enables connectivity and control in smart devices and sensor nodes.
  • Industrial Control Systems: Provides real-time control and monitoring capabilities in industrial automation.

Detailed and Complete Alternative Models

  • STM32F4 series: Offers a range of ARM Cortex-M4 based microcontrollers with similar features.
  • NXP Kinetis K series: Provides alternatives with comparable performance and peripheral integration.

In conclusion, the TM4C123GE6PMI microcontroller offers a powerful and versatile solution for embedded system development, IoT applications, and industrial control systems. Its advanced features and capabilities make it a popular choice among developers and engineers seeking high-performance microcontroller solutions.

[Word count: 443]

技術ソリューションにおける TM4C123GE6PMI の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the TM4C123GE6PMI microcontroller used for?

    • The TM4C123GE6PMI microcontroller is commonly used in technical solutions for embedded systems, IoT devices, and industrial control applications.

  2. What are the key features of the TM4C123GE6PMI?

    • The TM4C123GE6PMI features a 32-bit ARM Cortex-M4F core, integrated peripherals such as ADC, PWM, UART, SPI, I2C, and USB, as well as extensive connectivity options.

  3. How can I program the TM4C123GE6PMI microcontroller?

    • The TM4C123GE6PMI can be programmed using various development environments such as Keil µVision, Code Composer Studio, or Energia, with support for C/C++ programming languages.

  4. What are the power requirements for the TM4C123GE6PMI?

    • The TM4C123GE6PMI typically operates at a voltage range of 1.8V to 3.6V, making it suitable for low-power applications.

  5. Can the TM4C123GE6PMI interface with external sensors and actuators?

    • Yes, the TM4C123GE6PMI supports interfacing with a wide range of sensors and actuators through its integrated GPIO, ADC, and communication interfaces.

  6. Is the TM4C123GE6PMI suitable for real-time applications?

    • Yes, the TM4C123GE6PMI's ARM Cortex-M4F core and integrated peripherals make it well-suited for real-time control and monitoring applications.

  7. What communication protocols does the TM4C123GE6PMI support?

    • The TM4C123GE6PMI supports popular communication protocols such as UART, SPI, I2C, and USB, enabling seamless integration with other devices and systems.

  8. Are there any development kits available for the TM4C123GE6PMI?

    • Yes, there are development kits and evaluation boards available that provide a convenient platform for prototyping and testing applications based on the TM4C123GE6PMI.

  9. Can the TM4C123GE6PMI be used in automotive applications?

    • Yes, the TM4C123GE6PMI's robust features and reliability make it suitable for use in automotive control systems and vehicle electronics.

  10. What kind of technical support is available for the TM4C123GE6PMI?

    • Technical support for the TM4C123GE6PMI is available through the manufacturer's documentation, online forums, and community resources, as well as direct support from the manufacturer or distributors.