Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TM4C123GE6PZTR
詳細を表示 DataSheets

TM4C123GE6PZTR

Introduction

The TM4C123GE6PZTR belongs to the category of microcontrollers and is widely used in various electronic applications. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the TM4C123GE6PZTR.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, industrial control systems
  • Characteristics: Low power consumption, high performance, integrated peripherals
  • Package: LQFP (Low Profile Quad Flat Package)
  • Essence: ARM Cortex-M4F core
  • Packaging/Quantity: Tape & Reel, 250 units per reel

Specifications

  • Core: ARM Cortex-M4F
  • Clock Speed: Up to 80 MHz
  • Flash Memory: 256 KB
  • SRAM: 32 KB
  • Operating Voltage: 1.8V to 3.6V
  • I/O Pins: 64
  • Communication Interfaces: UART, SPI, I2C, USB
  • Analog-to-Digital Converter (ADC): 12-bit, 2 channels

Detailed Pin Configuration

The TM4C123GE6PZTR has a total of 64 I/O pins, each serving specific functions such as GPIO, communication interfaces, analog inputs, and power supply.

Functional Features

  • Integrated ADC for analog signal acquisition
  • Multiple communication interfaces for data exchange
  • On-chip memory for program and data storage
  • Low power modes for energy efficiency
  • Hardware encryption for data security

Advantages and Disadvantages

Advantages

  • High-performance ARM Cortex-M4F core
  • Rich set of integrated peripherals
  • Low power consumption
  • Secure data processing with hardware encryption

Disadvantages

  • Limited on-chip memory compared to some alternatives
  • Higher cost compared to lower-end microcontrollers

Working Principles

The TM4C123GE6PZTR operates based on the ARM Cortex-M4F architecture, executing instructions and handling data to perform various tasks. It interacts with external components through its I/O pins and communication interfaces, enabling it to control and monitor connected devices.

Detailed Application Field Plans

The TM4C123GE6PZTR is suitable for a wide range of applications including: - Industrial automation - Consumer electronics - Automotive systems - Smart home devices - Medical instruments

Detailed and Complete Alternative Models

Some alternative models to the TM4C123GE6PZTR include: - STM32F4 series from STMicroelectronics - PIC32 series from Microchip Technology - MSP430 series from Texas Instruments

In conclusion, the TM4C123GE6PZTR is a versatile microcontroller with a powerful ARM Cortex-M4F core, making it suitable for diverse embedded system applications. Its integrated peripherals, low power consumption, and secure data processing capabilities make it a compelling choice for developers seeking high-performance microcontroller solutions.

[Word Count: 410]

技術ソリューションにおける TM4C123GE6PZTR の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the TM4C123GE6PZTR microcontroller used for?

    • The TM4C123GE6PZTR microcontroller is commonly used in various technical solutions such as industrial control systems, consumer electronics, and automotive applications.

  2. What are the key features of the TM4C123GE6PZTR?

    • The TM4C123GE6PZTR features a 32-bit ARM Cortex-M4F core, integrated peripherals including ADCs, PWMs, UARTs, and SPIs, and extensive connectivity options.

  3. How can I program the TM4C123GE6PZTR microcontroller?

    • The TM4C123GE6PZTR can be programmed using various development environments such as Keil µVision, Code Composer Studio, or Energia, with support for C/C++ programming languages.

  4. What communication interfaces does the TM4C123GE6PZTR support?

    • The TM4C123GE6PZTR supports communication interfaces such as I2C, SPI, UART, USB, and Ethernet, making it suitable for a wide range of connectivity requirements.

  5. Can the TM4C123GE6PZTR be used for real-time applications?

    • Yes, the TM4C123GE6PZTR's ARM Cortex-M4F core with floating-point unit (FPU) makes it well-suited for real-time applications requiring high computational performance.

  6. What are the power requirements for the TM4C123GE6PZTR?

    • The TM4C123GE6PZTR typically operates at a supply voltage of 3.3V and features low-power modes to optimize energy efficiency in battery-powered applications.

  7. Does the TM4C123GE6PZTR have built-in security features?

    • Yes, the TM4C123GE6PZTR includes hardware-accelerated AES encryption, secure boot, and tamper detection features to enhance system security.

  8. Are there any development kits available for the TM4C123GE6PZTR?

    • Yes, Texas Instruments offers development kits such as the Tiva™ C Series TM4C123G LaunchPad Evaluation Kit, providing a convenient platform for prototyping and testing.

  9. What kind of applications are best suited for the TM4C123GE6PZTR?

    • The TM4C123GE6PZTR is well-suited for applications such as motor control, sensor interfacing, human-machine interface (HMI), and general embedded control systems.

  10. Is there a community or forum for TM4C123GE6PZTR developers?

    • Yes, there are active online communities and forums where developers can share knowledge, seek help, and collaborate on projects involving the TM4C123GE6PZTR microcontroller.