画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TPS53129RGET

TPS53129RGET

Product Overview

Category

The TPS53129RGET belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

This IC is primarily used for voltage regulation and power management in various electronic devices and systems.

Characteristics

  • High efficiency: The TPS53129RGET offers high conversion efficiency, ensuring optimal power utilization.
  • Wide input voltage range: It can handle a wide range of input voltages, making it suitable for diverse applications.
  • Compact package: The IC is available in a small package, enabling space-saving designs.
  • Low power consumption: It consumes minimal power during operation, contributing to energy efficiency.

Package and Quantity

The TPS53129RGET is typically packaged in a small outline integrated circuit (SOIC) package. It is commonly available in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input voltage range: 4.5V to 28V
  • Output voltage range: 0.6V to 5.5V
  • Maximum output current: 3A
  • Switching frequency: 500kHz
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

The TPS53129RGET has a total of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. VIN: Input voltage
  2. PGND: Power ground
  3. BOOT: Bootstrap capacitor connection
  4. PH: Power high-side MOSFET gate drive
  5. LGND: Logic ground
  6. VCC: Supply voltage for internal logic
  7. FB: Feedback voltage input
  8. COMP: Compensation node for feedback loop
  9. SS/TR: Soft-start/Tracking control
  10. EN: Enable control
  11. PGOOD: Power good indicator
  12. SS/TRIM: Soft-start time programming
  13. VSENSE: Current sense input
  14. AGND: Analog ground
  15. PGATE: Power low-side MOSFET gate drive
  16. SW: Switch node connection
  17. SW: Switch node connection
  18. SW: Switch node connection
  19. SW: Switch node connection
  20. SW: Switch node connection

Functional Features

  • Integrated power MOSFETs: The TPS53129RGET incorporates power MOSFETs, eliminating the need for external components.
  • Adjustable output voltage: The IC allows users to adjust the output voltage within a specified range.
  • Overcurrent protection: It includes built-in overcurrent protection to safeguard against excessive current flow.
  • Thermal shutdown: The IC features thermal shutdown protection, preventing damage due to overheating.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption and improved energy efficiency.
  • Wide input voltage range enables versatile applications.
  • Compact package facilitates space-saving designs.
  • Integrated power MOSFETs simplify circuit design and reduce component count.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Higher cost compared to non-integrated solutions.

Working Principles

The TPS53129RGET operates based on a switching regulator topology. It converts the input voltage to the desired output voltage by rapidly switching the power MOSFETs. This switching action, along with the inductor and capacitor, creates a regulated output voltage.

Detailed Application Field Plans

The TPS53129RGET finds applications in various fields, including: 1. Consumer electronics: Power management in smartphones, tablets, and portable devices. 2. Industrial automation: Voltage regulation in control systems and motor drives. 3. Automotive electronics: Power supply for infotainment systems and advanced driver-assistance systems (ADAS). 4. Telecommunications: Power management in networking equipment and base stations. 5. Renewable energy: Voltage regulation in solar power systems and wind turbines.

Detailed Alternative Models

  1. TPS53114RGET: Similar to TPS53129RGET but with a lower maximum output current of 2A.
  2. TPS53122RGET: Similar to TPS53129RGET but with a higher maximum output current of 4A.
  3. TPS53147RGET: Similar to TPS53129RGET but with a wider input voltage range of 2.95V to 28V.

These alternative models offer similar functionality and can be considered based on specific application requirements.

In conclusion, the TPS53129RGET is a power management IC that provides high efficiency, wide input voltage range, and compact package. It offers various advantages such as integrated power MOSFETs and adjustable output voltage. However, it has limitations in terms of maximum output current and cost. The IC operates based on a switching regulator topology and finds applications in consumer electronics, industrial automation,

技術ソリューションにおける TPS53129RGET の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TPS53129RGET in technical solutions:

  1. Q: What is the TPS53129RGET? A: The TPS53129RGET is a synchronous buck converter integrated circuit (IC) designed for high-current applications.

  2. Q: What is the input voltage range of the TPS53129RGET? A: The TPS53129RGET has an input voltage range of 4.5V to 17V.

  3. Q: What is the output voltage range of the TPS53129RGET? A: The TPS53129RGET can provide an adjustable output voltage range from 0.6V to 5.5V.

  4. Q: What is the maximum output current of the TPS53129RGET? A: The TPS53129RGET can deliver a maximum output current of 30A.

  5. Q: Does the TPS53129RGET require an external compensation network? A: No, the TPS53129RGET features an internal compensation network, simplifying the design process.

  6. Q: Can the TPS53129RGET operate in a wide temperature range? A: Yes, the TPS53129RGET is designed to operate in a temperature range of -40°C to 125°C.

  7. Q: What protection features does the TPS53129RGET offer? A: The TPS53129RGET provides protection against overcurrent, overvoltage, undervoltage, and thermal shutdown.

  8. Q: Is the TPS53129RGET suitable for automotive applications? A: Yes, the TPS53129RGET is AEC-Q100 qualified, making it suitable for automotive applications.

  9. Q: Can the TPS53129RGET be synchronized to an external clock? A: Yes, the TPS53129RGET supports synchronization to an external clock signal.

  10. Q: What package does the TPS53129RGET come in? A: The TPS53129RGET is available in a 5mm x 6mm QFN-40 package.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.