Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
UC2825NG4
詳細を表示 DataSheets

UC2825NG4

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: PWM Controller
  • Characteristics:
    • High-performance current-mode PWM controller
    • Designed for use in offline and DC-to-DC converters
    • Provides necessary features to implement off-line or DC-to-DC fixed-frequency current-mode control schemes
  • Package: DIP-16 (Dual In-Line Package with 16 pins)
  • Essence: Regulates the output voltage of power supplies efficiently
  • Packaging/Quantity: Available in reels, typically 2500 units per reel

Specifications

  • Input Voltage Range: 7.6V to 30V
  • Output Voltage Range: 0V to 5.1V
  • Operating Temperature Range: -40°C to 85°C
  • Maximum Duty Cycle: 100%
  • Oscillator Frequency Range: 50kHz to 500kHz
  • Error Amplifier Bandwidth: 10MHz
  • Soft Start Time: Adjustable

Detailed Pin Configuration

  1. VREF: Reference voltage input
  2. COMP: Error amplifier output
  3. FB: Feedback pin for regulating output voltage
  4. CS: Current sense input
  5. RT/CT: Timing components connection
  6. CT: Timing capacitor connection
  7. RT: Timing resistor connection
  8. GND: Ground
  9. SS/TR: Soft start and shutdown control
  10. VCC: Power supply input
  11. OUTA: Output A
  12. OUTB: Output B
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection

Functional Features

  • Current-mode control architecture
  • Adjustable soft-start time
  • Error amplifier with high bandwidth
  • Overcurrent protection
  • Under-voltage lockout (UVLO) protection
  • Leading-edge blanking (LEB) for improved noise immunity
  • Adaptive dead-time control

Advantages and Disadvantages

Advantages: - High-performance PWM controller - Suitable for offline and DC-to-DC converters - Provides necessary features for current-mode control schemes - Wide input voltage range - Adjustable soft-start time - Overcurrent and UVLO protection

Disadvantages: - Limited output voltage range (0V to 5.1V) - Requires external timing components (RT/CT)

Working Principles

The UC2825NG4 is a high-performance current-mode PWM controller used in power supply applications. It operates based on the current-mode control architecture, which provides excellent line and load regulation. The error amplifier compares the feedback voltage with the reference voltage to regulate the output voltage accurately.

The UC2825NG4 incorporates various protection features such as overcurrent protection and under-voltage lockout (UVLO) to ensure safe operation. It also includes adaptive dead-time control and leading-edge blanking (LEB) for improved noise immunity.

Detailed Application Field Plans

The UC2825NG4 is widely used in various power supply applications, including:

  1. Offline Power Supplies: Used in AC-to-DC converters for appliances, industrial equipment, and consumer electronics.
  2. DC-to-DC Converters: Employed in voltage regulators, battery chargers, and motor drives.
  3. LED Lighting: Utilized in LED drivers for efficient and dimmable lighting solutions.
  4. Telecom Power Systems: Integrated into power supplies for telecommunications infrastructure.

Detailed and Complete Alternative Models

  1. UC3825: Similar functionality with extended temperature range (-55°C to 125°C).
  2. TL494: PWM controller with similar features but different pin configuration.
  3. SG3525: Current-mode PWM controller with adjustable frequency and duty cycle.
  4. LT1241: High-performance PWM controller with integrated power MOSFET drivers.

These alternative models offer similar functionality and can be considered as substitutes for the UC2825NG4 in various applications.

Word count: 527 words

技術ソリューションにおける UC2825NG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of UC2825NG4 in technical solutions:

  1. Q: What is UC2825NG4? A: UC2825NG4 is a pulse width modulation (PWM) controller IC used for controlling power converters in various applications.

  2. Q: What are the key features of UC2825NG4? A: Some key features include adjustable frequency, soft-start capability, cycle-by-cycle current limiting, and high output drive capability.

  3. Q: What are the typical applications of UC2825NG4? A: UC2825NG4 is commonly used in switch-mode power supplies, motor control circuits, LED drivers, and other power conversion applications.

  4. Q: How does UC2825NG4 help in power conversion? A: UC2825NG4 provides precise control over the switching frequency and duty cycle of power converters, ensuring efficient power transfer and regulation.

  5. Q: Can UC2825NG4 handle high voltage inputs? A: Yes, UC2825NG4 can handle high voltage inputs up to 40V, making it suitable for a wide range of power supply designs.

  6. Q: Does UC2825NG4 have protection features? A: Yes, UC2825NG4 includes features like overvoltage protection, undervoltage lockout, and thermal shutdown to protect the circuit from faults and ensure safe operation.

  7. Q: How do I set the desired output voltage using UC2825NG4? A: The output voltage can be adjusted by changing the feedback resistors connected to the error amplifier input pin of UC2825NG4.

  8. Q: Can UC2825NG4 operate at high switching frequencies? A: Yes, UC2825NG4 can operate at high switching frequencies, typically up to several hundred kilohertz.

  9. Q: Is UC2825NG4 available in different package options? A: Yes, UC2825NG4 is available in various package options like PDIP, SOIC, and TSSOP, allowing flexibility in board layout and design.

  10. Q: Where can I find more information about UC2825NG4? A: You can refer to the datasheet provided by the manufacturer or visit their website for detailed information on UC2825NG4's specifications, application notes, and design resources.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.