XC6108C34AGR-G
Product Overview
Category
XC6108C34AGR-G belongs to the category of voltage regulators.
Use
It is commonly used as a power management solution in electronic devices.
Characteristics
- Voltage regulation capability
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Overcurrent protection
Package
XC6108C34AGR-G is available in a small surface-mount package.
Essence
The essence of XC6108C34AGR-G lies in its ability to regulate and stabilize voltage levels in electronic circuits.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.4V
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6108C34AGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6108C34AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The device consumes minimal current when in standby mode, conserving power.
- Thermal shutdown protection: It automatically shuts down if the temperature exceeds a certain threshold, preventing damage.
- Overcurrent protection: XC6108C34AGR-G safeguards against excessive current flow, protecting the circuitry.
Advantages and Disadvantages
Advantages
- High voltage regulation accuracy
- Low power consumption
- Compact size
- Wide operating temperature range
Disadvantages
- Limited output current capacity
- Not suitable for high-power applications
Working Principles
XC6108C34AGR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly. By continuously monitoring and adjusting, it ensures a stable output voltage despite variations in input voltage or load conditions.
Detailed Application Field Plans
XC6108C34AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C34AGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TPS73633DBVR
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 346 words
技術ソリューションにおける XC6108C34AGR-G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XC6108C34AGR-G in technical solutions:
1. What is XC6108C34AGR-G? - XC6108C34AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
2. What is the operating voltage range of XC6108C34AGR-G? - The operating voltage range of XC6108C34AGR-G is typically between 0.9V and 6.0V.
3. What is the typical reset threshold voltage of XC6108C34AGR-G? - The typical reset threshold voltage of XC6108C34AGR-G is 3.4V.
4. How does XC6108C34AGR-G help in technical solutions? - XC6108C34AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage drops below a certain level, ensuring proper system initialization and preventing data corruption.
5. Can XC6108C34AGR-G be used in battery-powered applications? - Yes, XC6108C34AGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current, making it suitable for power-sensitive designs.
6. Does XC6108C34AGR-G have any built-in delay time for the reset signal? - Yes, XC6108C34AGR-G has a built-in delay time of approximately 200ms to ensure stable power supply before releasing the reset signal.
7. Is XC6108C34AGR-G available in different package options? - Yes, XC6108C34AGR-G is available in different package options, such as SOT-25 and USP-4B.
8. Can XC6108C34AGR-G be used in automotive applications? - Yes, XC6108C34AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards, ensuring high reliability and performance in harsh environments.
9. What is the maximum operating temperature range of XC6108C34AGR-G? - The maximum operating temperature range of XC6108C34AGR-G is typically between -40°C and +85°C.
10. Is XC6108C34AGR-G RoHS compliant? - Yes, XC6108C34AGR-G is RoHS (Restriction of Hazardous Substances) compliant, making it environmentally friendly and safe to use in various applications.
Please note that the answers provided above are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C34AGR-G.