XC6108C44AGR-G
Product Overview
Category
XC6108C44AGR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Small size and compact design
- High efficiency
- Low power consumption
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6108C44AGR-G comes in a 44-pin package.
Essence
The essence of XC6108C44AGR-G is to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
The product is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.0V
- Output Current: Up to 500mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 50µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The XC6108C44AGR-G has a total of 44 pins. The pin configuration is as follows:
- VOUT
- GND
- EN
- FB
- VIN
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
Functional Features
- Voltage regulation: XC6108C44AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: The device automatically shuts down in case of excessive current flow, protecting the circuit and connected devices.
- Thermal shutdown protection: In case of high temperature, the regulator enters a shutdown mode to prevent damage.
Advantages and Disadvantages
Advantages
- Small size and compact design make it suitable for space-constrained applications.
- High efficiency results in minimal power loss.
- Wide input voltage range allows compatibility with various power sources.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect performance in low-voltage scenarios.
Working Principles
XC6108C44AGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through a combination of active components and passive elements within the regulator.
Detailed Application Field Plans
XC6108C44AGR-G finds applications in various electronic devices and systems, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - IoT devices - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C44AGR-G are: - LM1117-3.3 - LT1084CP-5 - TPS7A4700 - ADP3339AKCZ-3.3-R7 - MAX6035AAUR50-T
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and design considerations.
Word count: 399 words
技術ソリューションにおける XC6108C44AGR-G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XC6108C44AGR-G in technical solutions:
Q: What is XC6108C44AGR-G? A: XC6108C44AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when it falls below a certain threshold.
Q: What is the operating voltage range of XC6108C44AGR-G? A: The operating voltage range of XC6108C44AGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C44AGR-G help in technical solutions? A: XC6108C44AGR-G ensures stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctioning or data corruption during power fluctuations.
Q: Can XC6108C44AGR-G be used in battery-powered applications? A: Yes, XC6108C44AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6108C44AGR-G? A: XC6108C44AGR-G has an open-drain output type, which allows for flexibility in connecting to different microcontrollers or other devices.
Q: What is the typical reset threshold voltage of XC6108C44AGR-G? A: The typical reset threshold voltage of XC6108C44AGR-G is 2.93V.
Q: Does XC6108C44AGR-G have built-in hysteresis? A: Yes, XC6108C44AGR-G has built-in hysteresis of typically 100mV, which helps to prevent oscillation or chattering of the reset signal.
Q: Can XC6108C44AGR-G be used in automotive applications? A: Yes, XC6108C44AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6108C44AGR-G? A: XC6108C44AGR-G is available in a compact SOT-25 package, which is small and easy to integrate into various designs.
Q: Is XC6108C44AGR-G RoHS compliant? A: Yes, XC6108C44AGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C44AGR-G.