Torex Semiconductor Ltd
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6108C47AGR-G
詳細を表示 DataSheets

XC6108C47AGR-G

Product Overview

Category

XC6108C47AGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108C47AGR-G is available in a small surface-mount package.

Essence

The essence of XC6108C47AGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6108C47AGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.7V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C47AGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108C47AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
  • Low quiescent current: The device consumes minimal current when not actively regulating voltage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Low power consumption helps conserve energy.
  • Stable voltage output ensures reliable performance of connected devices.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6108C47AGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This feedback loop continuously monitors and regulates the output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

XC6108C47AGR-G finds application in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C47AGR-G are: - LM317: A popular adjustable voltage regulator with a wide input voltage range. - LT1084: A high-current, low-dropout voltage regulator suitable for demanding applications. - MCP1700: A low quiescent current LDO regulator with a small form factor.

These alternative models offer similar functionality and can be chosen based on specific requirements and design constraints.

Word count: 363 words

技術ソリューションにおける XC6108C47AGR-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6108C47AGR-G in technical solutions:

  1. Q: What is XC6108C47AGR-G? A: XC6108C47AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C47AGR-G? A: The operating voltage range of XC6108C47AGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C47AGR-G help in technical solutions? A: XC6108C47AGR-G ensures stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctioning or data corruption during power fluctuations.

  4. Q: Can XC6108C47AGR-G be used in battery-powered applications? A: Yes, XC6108C47AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the reset output type of XC6108C47AGR-G? A: XC6108C47AGR-G provides an active-low reset output.

  6. Q: What is the typical reset threshold voltage of XC6108C47AGR-G? A: The typical reset threshold voltage of XC6108C47AGR-G is 4.7V.

  7. Q: Is XC6108C47AGR-G suitable for automotive applications? A: Yes, XC6108C47AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: Can XC6108C47AGR-G be used in industrial control systems? A: Yes, XC6108C47AGR-G is suitable for industrial control systems as it operates reliably in a wide temperature range of -40°C to +105°C.

  9. Q: Does XC6108C47AGR-G have built-in hysteresis? A: Yes, XC6108C47AGR-G has built-in hysteresis to prevent oscillation caused by voltage fluctuations near the threshold.

  10. Q: What package options are available for XC6108C47AGR-G? A: XC6108C47AGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C47AGR-G.