XC6108N10AGR-G
Product Overview
Category
XC6108N10AGR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- Compact size
- Low power consumption
- Wide input voltage range
Package
XC6108N10AGR-G is available in a small surface-mount package.
Essence
The essence of XC6108N10AGR-G lies in its ability to regulate voltage efficiently and reliably.
Packaging/Quantity
XC6108N10AGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.0V
- Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6108N10AGR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: XC6108N10AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
- Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Efficient voltage regulation
- Small form factor
- Low power consumption
- Wide input voltage range
Disadvantages
- Limited output current capacity (100mA)
- Dropout voltage may affect performance in low input voltage scenarios
Working Principles
XC6108N10AGR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly. By continuously monitoring and adjusting, it ensures a stable output voltage despite variations in the input voltage.
Detailed Application Field Plans
XC6108N10AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108N10AGR-G are: - LM1117-1.0 - MCP1700-100 - TPS79301
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 346 words
技術ソリューションにおける XC6108N10AGR-G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XC6108N10AGR-G in technical solutions:
Q: What is XC6108N10AGR-G? A: XC6108N10AGR-G is a voltage detector IC (Integrated Circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What are the typical applications of XC6108N10AGR-G? A: XC6108N10AGR-G is commonly used in various electronic devices and systems, such as microcontrollers, microprocessors, DSPs (Digital Signal Processors), and other digital circuits.
Q: How does XC6108N10AGR-G help in technical solutions? A: XC6108N10AGR-G ensures reliable operation by monitoring the power supply voltage and generating a reset signal to prevent malfunction or data corruption during power-up or voltage fluctuations.
Q: What is the operating voltage range of XC6108N10AGR-G? A: The operating voltage range of XC6108N10AGR-G is typically between 0.9V and 10V.
Q: Can XC6108N10AGR-G be used with different power supply voltages? A: Yes, XC6108N10AGR-G can be used with various power supply voltages within its specified operating range.
Q: Does XC6108N10AGR-G have any adjustable parameters? A: No, XC6108N10AGR-G does not have any adjustable parameters. It has a fixed threshold voltage for detecting the power supply voltage.
Q: What is the output type of XC6108N10AGR-G? A: XC6108N10AGR-G has an open-drain output, which requires an external pull-up resistor to provide a logic-level signal.
Q: Can XC6108N10AGR-G be used in battery-powered applications? A: Yes, XC6108N10AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Is XC6108N10AGR-G suitable for automotive applications? A: Yes, XC6108N10AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Are there any specific precautions to consider when using XC6108N10AGR-G? A: It is important to ensure proper decoupling and filtering of the power supply to minimize noise and voltage fluctuations that could affect the operation of XC6108N10AGR-G. Additionally, attention should be given to the selection of the external pull-up resistor value for the open-drain output.