Torex Semiconductor Ltd
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6122D441MR-G
詳細を表示 DataSheets

XC6122D441MR-G

Product Overview

Category

XC6122D441MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

XC6122D441MR-G is available in a small surface mount package.

Essence

The essence of XC6122D441MR-G lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

XC6122D441MR-G is typically packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.41V
  • Output Current: 200mA (maximum)
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D441MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122D441MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
  • Low quiescent current: The low quiescent current ensures minimal power consumption when the load is light.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Wide input voltage range makes it compatible with various power sources.
  • High efficiency results in minimal power loss during voltage regulation.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

XC6122D441MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6122D441MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122D441MR-G are: - XC6206P332MR-G - XC6219B332MR-G - XC6220B332MR-G - XC6221B332MR-G - XC6222B332MR-G

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Note: The content provided above is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.

技術ソリューションにおける XC6122D441MR-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6122D441MR-G in technical solutions:

  1. Q: What is XC6122D441MR-G? A: XC6122D441MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring and detecting voltage levels in various electronic applications.

  2. Q: What is the operating voltage range of XC6122D441MR-G? A: The operating voltage range of XC6122D441MR-G is from 0.8V to 6.0V.

  3. Q: What is the output configuration of XC6122D441MR-G? A: XC6122D441MR-G has an open-drain output configuration, which means it can sink current but cannot source current.

  4. Q: How accurate is the voltage detection of XC6122D441MR-G? A: XC6122D441MR-G has a detection accuracy of ±1.5% at room temperature.

  5. Q: Can XC6122D441MR-G be used for overvoltage protection? A: No, XC6122D441MR-G is not designed for overvoltage protection. It is primarily used for voltage monitoring and detection purposes.

  6. Q: What is the quiescent current consumption of XC6122D441MR-G? A: The quiescent current consumption of XC6122D441MR-G is typically 1.0µA, making it suitable for low-power applications.

  7. Q: Does XC6122D441MR-G have built-in hysteresis? A: Yes, XC6122D441MR-G has built-in hysteresis of typically 100mV, which helps to prevent output oscillation near the detection threshold.

  8. Q: Can XC6122D441MR-G be used in automotive applications? A: Yes, XC6122D441MR-G is AEC-Q100 qualified and can be used in automotive applications that require voltage monitoring and detection.

  9. Q: What is the temperature range of XC6122D441MR-G? A: XC6122D441MR-G has an operating temperature range of -40°C to +85°C.

  10. Q: How is XC6122D441MR-G typically packaged? A: XC6122D441MR-G is commonly available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.