Torex Semiconductor Ltd
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6209B182MR-G
詳細を表示 DataSheets

XC6209B182MR-G

Product Overview

Category

XC6209B182MR-G belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • Low quiescent current
  • High output voltage accuracy
  • Thermal shutdown protection
  • Short circuit current limit

Package

XC6209B182MR-G is available in a small surface mount SOT-23 package.

Essence

The essence of XC6209B182MR-G lies in its ability to provide stable and regulated voltage for various electronic applications.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6209B182MR-G voltage regulators.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Maximum Output Current: 200mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6209B182MR-G has three pins:

  1. VIN: Input voltage pin
  2. VOUT: Output voltage pin
  3. GND: Ground pin

Functional Features

  • Low dropout voltage ensures efficient regulation even with low input voltages.
  • Low quiescent current minimizes power consumption when the regulator is idle.
  • High output voltage accuracy provides precise voltage regulation.
  • Thermal shutdown protection prevents damage due to excessive heat.
  • Short circuit current limit protects the regulator and connected components from damage during a short circuit event.

Advantages and Disadvantages

Advantages

  • Compact size and surface mount package make it suitable for space-constrained applications.
  • Wide input voltage range allows for flexibility in various electronic circuits.
  • Low dropout voltage ensures efficient power utilization.
  • Thermal shutdown protection enhances reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Output voltage fixed at 1.8V may not meet the requirements of all applications.

Working Principles

XC6209B182MR-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output pins. The internal circuitry monitors the input and output voltages, adjusting the resistance as necessary to maintain a stable output voltage.

Detailed Application Field Plans

XC6209B182MR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6209B182MR-G are: - LM1117-1.8 - LT1763-1.8 - MCP1702-1802

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific application requirements.

Word count: 413 words

技術ソリューションにおける XC6209B182MR-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6209B182MR-G in technical solutions:

  1. Q: What is XC6209B182MR-G? A: XC6209B182MR-G is a voltage regulator IC that provides a stable output voltage for various electronic devices.

  2. Q: What is the input voltage range for XC6209B182MR-G? A: The input voltage range for XC6209B182MR-G is typically between 2.5V and 6.0V.

  3. Q: What is the output voltage of XC6209B182MR-G? A: The output voltage of XC6209B182MR-G is fixed at 1.8V.

  4. Q: What is the maximum output current of XC6209B182MR-G? A: The maximum output current of XC6209B182MR-G is 200mA.

  5. Q: Can XC6209B182MR-G be used in battery-powered applications? A: Yes, XC6209B182MR-G can be used in battery-powered applications as it has a low dropout voltage and low quiescent current.

  6. Q: Is XC6209B182MR-G suitable for use in automotive electronics? A: Yes, XC6209B182MR-G is suitable for use in automotive electronics as it meets the AEC-Q100 automotive qualification standards.

  7. Q: Does XC6209B182MR-G have built-in thermal shutdown protection? A: Yes, XC6209B182MR-G has built-in thermal shutdown protection to prevent overheating.

  8. Q: Can XC6209B182MR-G operate in a wide temperature range? A: Yes, XC6209B182MR-G can operate in a temperature range of -40°C to +85°C.

  9. Q: Does XC6209B182MR-G require any external components for operation? A: Yes, XC6209B182MR-G requires input and output capacitors for stable operation.

  10. Q: Is XC6209B182MR-G available in different package options? A: Yes, XC6209B182MR-G is available in various package options, such as SOT-23 and USP-4B.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.