Torex Semiconductor Ltd
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6218P302NR-G
詳細を表示 DataSheets

XC6218P302NR-G

Introduction

The XC6218P302NR-G is a voltage regulator belonging to the category of electronic components used for regulating voltage in various electronic circuits. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: SOT-23-5
  • Essence: Efficient voltage regulation
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage: 3.0V
  • Output Current: 200mA
  • Dropout Voltage: 160mV @ 100mA
  • Quiescent Current: 1.0μA (TYP.)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6218P302NR-G has a standard SOT-23-5 package with the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. CE (Chip Enable) 4. NC (No Connection) 5. VOUT (Output Voltage)

Functional Features

  • Low Dropout Voltage: Enables efficient regulation even with small input-output differentials.
  • Low Quiescent Current: Ensures minimal power consumption during standby or idle modes.
  • Overcurrent Protection: Safeguards the device and connected circuitry from excessive currents.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Small form factor
  • Low dropout voltage
  • Low quiescent current

Disadvantages

  • Limited output current capacity
  • Restricted input voltage range

Working Principles

The XC6218P302NR-G operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor to maintain a stable output voltage. When the input voltage fluctuates, the internal circuitry compensates to ensure a consistent output voltage.

Detailed Application Field Plans

The XC6218P302NR-G finds applications in various electronic devices such as: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable technology - Sensor modules

Detailed and Complete Alternative Models

Some alternative models to the XC6218P302NR-G include: - LM1117 - MCP1703 - AP2112

In conclusion, the XC6218P302NR-G is a reliable voltage regulator with high precision and low dropout voltage, making it suitable for a wide range of electronic applications.

[Word Count: 368]

技術ソリューションにおける XC6218P302NR-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of XC6218P302NR-G:

  1. What is the input voltage range for XC6218P302NR-G?

    • The input voltage range for XC6218P302NR-G is 2.5V to 6.0V.

  2. What is the output voltage of XC6218P302NR-G?

    • The output voltage of XC6218P302NR-G is 3.0V.

  3. What is the maximum output current of XC6218P302NR-G?

    • The maximum output current of XC6218P302NR-G is 200mA.

  4. What is the dropout voltage of XC6218P302NR-G?

    • The dropout voltage of XC6218P302NR-G is typically 190mV at 100mA load.

  5. What is the quiescent current of XC6218P302NR-G?

    • The quiescent current of XC6218P302NR-G is typically 75µA.

  6. What is the operating temperature range of XC6218P302NR-G?

    • The operating temperature range of XC6218P302NR-G is -40°C to 85°C.

  7. Is XC6218P302NR-G suitable for battery-powered applications?

    • Yes, XC6218P302NR-G is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  8. Does XC6218P302NR-G require external capacitors for stability?

    • No, XC6218P302NR-G does not require external capacitors for stability, making it suitable for space-constrained designs.

  9. Can XC6218P302NR-G withstand short-circuit conditions?

    • Yes, XC6218P302NR-G has built-in overcurrent protection and thermal shutdown to withstand short-circuit conditions.

  10. What are the typical applications for XC6218P302NR-G?

    • Typical applications for XC6218P302NR-G include power supplies for portable devices, battery-powered equipment, and various microcontroller-based systems.