Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BA158-E3/54
詳細を表示 DataSheets

BA158-E3/54 Product Overview

Introduction

The BA158-E3/54 is a diode belonging to the semiconductor category. This diode is commonly used in electronic circuits for various applications due to its specific characteristics and performance.

Basic Information Overview

  • Category: Semiconductor diode
  • Use: Rectification, voltage regulation, signal demodulation
  • Characteristics: High efficiency, low forward voltage drop, fast switching speed
  • Package: DO-41 (DO-204AL)
  • Essence: Silicon diode
  • Packaging/Quantity: Typically available in reels of 1000 units

Specifications

  • Forward Voltage Drop: 0.7V
  • Reverse Voltage: 100V
  • Maximum Continuous Forward Current: 1A
  • Reverse Recovery Time: 4ns
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The BA158-E3/54 diode has two pins, anode and cathode, with the standard pinout configuration for a DO-41 package.

Functional Features

  • Efficient rectification of AC to DC
  • Low forward voltage drop minimizes power loss
  • Fast switching speed enables high-frequency applications

Advantages and Disadvantages

Advantages

  • High efficiency
  • Low forward voltage drop
  • Fast switching speed

Disadvantages

  • Limited maximum continuous forward current
  • Sensitive to reverse voltage spikes

Working Principles

The BA158-E3/54 diode operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the reverse direction. When forward biased, it conducts current with minimal voltage drop, making it suitable for rectification and voltage regulation.

Detailed Application Field Plans

The BA158-E3/54 diode finds extensive use in various electronic applications, including: - Power supply units - Voltage regulators - Signal demodulation circuits - Switching power supplies - LED lighting systems

Detailed and Complete Alternative Models

  • 1N4148: A general-purpose silicon diode with similar characteristics
  • 1N4001: A higher voltage rating diode suitable for power applications
  • 1N5819: Schottky diode with lower forward voltage drop

In conclusion, the BA158-E3/54 diode offers efficient rectification and voltage regulation capabilities, making it a versatile component in electronic circuits across various industries.

Word count: 345

技術ソリューションにおける BA158-E3/54 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is BA158-E3/54?

    • BA158-E3/54 is a high-power, fast-recovery rectifier diode commonly used in technical solutions for power supply and voltage regulation.

  2. What are the key specifications of BA158-E3/54?

    • The key specifications include a maximum repetitive peak reverse voltage of 1000V, average forward current of 1.5A, and a fast recovery time of 50ns.

  3. How is BA158-E3/54 typically used in technical solutions?

    • BA158-E3/54 is often used in rectification circuits, freewheeling diodes, and snubber circuits in power supplies, inverters, and other electronic systems.

  4. What are the advantages of using BA158-E3/54 in technical solutions?

    • Its fast recovery time and high-power capabilities make it suitable for applications requiring efficient energy conversion and minimal switching losses.

  5. Are there any specific thermal considerations when using BA158-E3/54?

    • Yes, proper heat sinking and thermal management are important to ensure the diode operates within its temperature limits for optimal performance and reliability.

  6. Can BA158-E3/54 be used in high-frequency applications?

    • Yes, BA158-E3/54's fast recovery time makes it suitable for high-frequency switching applications such as switch-mode power supplies and inverters.

  7. What are the typical failure modes of BA158-E3/54 in technical solutions?

    • Common failure modes include thermal overstress, excessive reverse voltage, and excessive forward current leading to junction breakdown.

  8. Is BA158-E3/54 suitable for automotive or industrial applications?

    • Yes, BA158-E3/54 is often used in automotive and industrial applications due to its rugged construction and high reliability.

  9. Are there any recommended layout considerations when using BA158-E3/54 in PCB designs?

    • It's important to minimize parasitic inductance and ensure proper isolation and clearance distances to optimize the diode's performance and safety.

  10. Where can I find detailed application notes and reference designs for using BA158-E3/54 in technical solutions?

    • You can refer to the manufacturer's datasheets, application notes, and design guides for comprehensive information on integrating BA158-E3/54 into various technical solutions.