Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BYM07-300-E3/83
詳細を表示 DataSheets

BYM07-300-E3/83 Product Overview

Introduction

The BYM07-300-E3/83 is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to ensure stable and regulated power supply, thereby enhancing the overall performance and reliability of the equipment.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: To regulate and stabilize voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-220
  • Essence: Ensures consistent and reliable power supply
  • Packaging/Quantity: Typically packaged in reels or tubes, quantity varies based on supplier and order size

Specifications

  • Input Voltage Range: 4V to 28V
  • Output Voltage: 3.3V
  • Output Current: 300mA
  • Dropout Voltage: 0.5V at 300mA
  • Operating Temperature Range: -40°C to 125°C
  • Quiescent Current: 75µA
  • Line Regulation: 0.2% typical
  • Load Regulation: 1% typical

Detailed Pin Configuration

The BYM07-300-E3/83 features a standard TO-220 pin configuration with three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation
  • Low Dropout Voltage: Enables efficient operation even when the input voltage is close to the output voltage
  • Thermal Shutdown Protection: Safeguards the regulator from overheating, ensuring long-term reliability

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Low dropout voltage for efficient operation
  • Thermal shutdown protection for enhanced safety

Disadvantages

  • Limited output current capacity
  • Higher quiescent current compared to some alternatives

Working Principles

The BYM07-300-E3/83 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage. When the input voltage or load changes, the regulator responds to ensure a stable output voltage.

Detailed Application Field Plans

The BYM07-300-E3/83 is commonly used in various applications, including: - Battery-powered devices - Portable electronics - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • LM1117: Similar voltage regulator with higher output current capacity
  • XC6206: Low quiescent current alternative for battery-powered applications
  • LM2937: Regulator with lower dropout voltage for more demanding voltage requirements

In conclusion, the BYM07-300-E3/83 is a reliable voltage regulator with precise regulation and thermal protection, making it suitable for a wide range of electronic applications.

[Word Count: 443]

技術ソリューションにおける BYM07-300-E3/83 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the BYM07-300-E3/83?

    • The BYM07-300-E3/83 is a specific model of a power diode module designed for high-power applications.

  2. What are the key specifications of the BYM07-300-E3/83?

    • The BYM07-300-E3/83 typically has a maximum average forward current of 300A and a maximum repetitive peak reverse voltage of 1800V.

  3. In what technical solutions can the BYM07-300-E3/83 be used?

    • The BYM07-300-E3/83 is commonly used in high-power rectifier and freewheeling diode applications, such as in motor drives, power supplies, and welding equipment.

  4. What are the advantages of using the BYM07-300-E3/83 in technical solutions?

    • The BYM07-300-E3/83 offers low conduction and switching losses, high surge capability, and high reliability, making it suitable for demanding industrial applications.

  5. Are there any thermal considerations when using the BYM07-300-E3/83?

    • Yes, proper thermal management is important when using the BYM07-300-E3/83 to ensure optimal performance and reliability.

  6. Can the BYM07-300-E3/83 be used in parallel configurations for higher current requirements?

    • Yes, the BYM07-300-E3/83 can be used in parallel to meet higher current demands, but careful attention must be paid to current sharing and thermal balance.

  7. What protection features does the BYM07-300-E3/83 offer?

    • The BYM07-300-E3/83 may include built-in overcurrent and overtemperature protection features to safeguard against excessive stress or fault conditions.

  8. Is the BYM07-300-E3/83 suitable for harsh environmental conditions?

    • The BYM07-300-E3/83 is often designed to withstand harsh industrial environments, but specific environmental ratings should be considered based on the application requirements.

  9. What are the typical mounting and connection methods for the BYM07-300-E3/83?

    • The BYM07-300-E3/83 can be mounted using standard methods such as screw mounting or clamping, and it typically features bolted electrical connections.

  10. Where can I find detailed application notes and guidelines for using the BYM07-300-E3/83?

    • Detailed application notes and guidelines for the BYM07-300-E3/83 can usually be found in the product datasheet provided by the manufacturer or through their technical support resources.