Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BYV26C-TAP
詳細を表示 DataSheets

BYV26C-TAP

Product Overview

Category

The BYV26C-TAP belongs to the category of semiconductor devices, specifically a fast recovery diode.

Use

It is commonly used in power supply and rectifier applications where fast switching and high efficiency are required.

Characteristics

  • Fast recovery time
  • High voltage capability
  • Low forward voltage drop

Package

The BYV26C-TAP is typically available in a small surface mount package, such as SOD-123.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) with minimal loss and high speed.

Packaging/Quantity

It is usually supplied in reels or tubes containing a specific quantity, such as 3000 units per reel.

Specifications

  • Maximum repetitive peak reverse voltage: 600V
  • Average forward current: 1A
  • Reverse recovery time: 35ns
  • Forward voltage drop: 1.15V at 1A

Detailed Pin Configuration

The BYV26C-TAP has a standard SOD-123 package with two pins. The cathode is connected to the marked side of the package, while the anode is connected to the unmarked side.

Functional Features

  • Fast recovery time allows for efficient switching
  • High voltage capability enables use in various power applications
  • Low forward voltage drop minimizes power loss

Advantages and Disadvantages

Advantages

  • Fast recovery time improves efficiency
  • High voltage capability for versatile applications
  • Low forward voltage drop reduces power dissipation

Disadvantages

  • Limited maximum repetitive peak reverse voltage compared to some alternatives
  • Relatively low average forward current rating

Working Principles

The BYV26C-TAP operates based on the principle of creating a one-way flow of current when a positive voltage is applied to the anode with respect to the cathode. Its fast recovery time ensures that it quickly returns to a non-conductive state when the voltage polarity reverses.

Detailed Application Field Plans

Power Supplies

The BYV26C-TAP is commonly used in switch-mode power supplies due to its fast recovery time and low forward voltage drop, which contribute to high efficiency.

Rectifiers

In rectifier circuits, this diode efficiently converts AC to DC, making it suitable for various electronic devices and equipment.

Motor Drives

Its high voltage capability makes it suitable for use in motor drive circuits, where rapid switching is required.

Detailed and Complete Alternative Models

  • BYV27C-TAP: Higher maximum repetitive peak reverse voltage
  • BYV28C-TAP: Higher average forward current rating
  • UF4007: Similar fast recovery diode with higher voltage capability

In conclusion, the BYV26C-TAP is a fast recovery diode with specific characteristics that make it suitable for power supply and rectifier applications. Its fast recovery time, high voltage capability, and low forward voltage drop are key advantages, although it may have limitations in certain high-voltage applications. Understanding its specifications, pin configuration, functional features, and alternative models is crucial for effective utilization in electronic designs.

技術ソリューションにおける BYV26C-TAP の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of BYV26C-TAP:

  1. What is BYV26C-TAP?

    • BYV26C-TAP is a fast recovery diode with a voltage rating of 200V and a current rating of 1A.

  2. What are the typical applications of BYV26C-TAP?

    • BYV26C-TAP is commonly used in freewheeling, clamping, snubber circuits, and reverse battery protection.

  3. What is the maximum forward voltage drop of BYV26C-TAP?

    • The maximum forward voltage drop of BYV26C-TAP is typically around 0.85V at a forward current of 1A.

  4. What is the reverse recovery time of BYV26C-TAP?

    • The reverse recovery time of BYV26C-TAP is typically around 30ns.

  5. Can BYV26C-TAP be used in high-frequency applications?

    • Yes, BYV26C-TAP is suitable for high-frequency applications due to its fast recovery time.

  6. What is the operating temperature range of BYV26C-TAP?

    • The operating temperature range of BYV26C-TAP is typically -65°C to +175°C.

  7. Is BYV26C-TAP RoHS compliant?

    • Yes, BYV26C-TAP is RoHS compliant, making it suitable for use in environmentally friendly designs.

  8. Can BYV26C-TAP handle surge currents?

    • Yes, BYV26C-TAP has a surge current capability that makes it suitable for handling transient overloads.

  9. What package type is BYV26C-TAP available in?

    • BYV26C-TAP is available in a SOD-123 package, which is a surface-mount package.

  10. Are there any recommended layout considerations for using BYV26C-TAP?

    • It is recommended to minimize the loop area and keep the traces short when designing the PCB layout for BYV26C-TAP to minimize parasitic inductance and resistance.

I hope these questions and answers are helpful! Let me know if you need further assistance.