Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BZM55C3V0-TR3
詳細を表示 DataSheets

BZM55C3V0-TR3

Introduction

The BZM55C3V0-TR3 is a component belonging to the category of voltage regulator diodes. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator Diodes
  • Use: Voltage regulation in electronic circuits
  • Characteristics: Low forward voltage drop, high current capability
  • Package: SOD-123
  • Essence: Zener diode
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage: 3.0V
  • Power Dissipation: 500mW
  • Operating Temperature Range: -65°C to +150°C
  • Forward Voltage Drop: 1.2V at 200mA

Detailed Pin Configuration

The BZM55C3V0-TR3 has a standard SOD-123 package with two pins. The pinout configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Precise voltage regulation
  • High current handling capability
  • Reverse voltage protection

Advantages and Disadvantages

Advantages

  • Accurate voltage regulation
  • Compact SOD-123 package
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Higher forward voltage drop compared to some alternatives

Working Principles

The BZM55C3V0-TR3 operates based on the Zener effect, where it maintains a constant voltage across its terminals when reverse biased. This allows it to regulate the voltage in electronic circuits by diverting excess current when the voltage exceeds its rated value.

Detailed Application Field Plans

The BZM55C3V0-TR3 finds applications in various electronic devices and systems, including: - Voltage regulators in power supplies - Overvoltage protection circuits - Signal clamping circuits

Detailed and Complete Alternative Models

Some alternative models to the BZM55C3V0-TR3 include: - BZX84C3V0: SOT-23 package, similar voltage rating - 1N5226B: DO-35 package, higher power dissipation capability - MM3Z3V0: SOD-323 package, smaller footprint

In conclusion, the BZM55C3V0-TR3 is a voltage regulator diode with precise voltage regulation capabilities, suitable for various electronic applications.

[Word count: 350]

技術ソリューションにおける BZM55C3V0-TR3 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the BZM55C3V0-TR3?

    • The BZM55C3V0-TR3 is a 3.0V surface mount Zener diode designed for general purpose voltage regulation applications.

  2. What are the key features of BZM55C3V0-TR3?

    • The key features include a low profile package, high reliability, and a wide operating temperature range.

  3. What are the typical applications of BZM55C3V0-TR3?

    • Typical applications include voltage regulation in portable devices, power management in consumer electronics, and protection circuits in various electronic systems.

  4. What is the maximum power dissipation of BZM55C3V0-TR3?

    • The maximum power dissipation is 500mW.

  5. What is the maximum forward voltage of BZM55C3V0-TR3?

    • The maximum forward voltage is 1.2V at 200mA.

  6. What is the reverse leakage current of BZM55C3V0-TR3?

    • The reverse leakage current is typically 5μA at the working voltage.

  7. What is the temperature coefficient of BZM55C3V0-TR3?

    • The temperature coefficient is 0.07%/°C.

  8. What is the storage temperature range for BZM55C3V0-TR3?

    • The storage temperature range is -65°C to +150°C.

  9. What are the packaging options available for BZM55C3V0-TR3?

    • The BZM55C3V0-TR3 is available in a variety of surface mount packages including SOD-123, SOD-323, and SOT-23.

  10. What are the recommended soldering conditions for BZM55C3V0-TR3?

    • The recommended soldering conditions include a peak temperature of 260°C for 10 seconds and a maximum of two reflows.