Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ES1D-M3/5AT
詳細を表示 DataSheets

ES1D-M3/5AT

Introduction

The ES1D-M3/5AT is a diode belonging to the semiconductor category. It is widely used in electronic circuits for its specific characteristics and features. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Diode
  • Use: Rectification and voltage regulation in electronic circuits
  • Characteristics: High efficiency, low forward voltage drop, fast switching speed
  • Package: SOD-123FL
  • Essence: Silicon diode
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Maximum Forward Voltage: 1V
  • Maximum Reverse Voltage: 100V
  • Maximum Average Rectified Current: 1A
  • Operating Temperature Range: -65°C to +150°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The ES1D-M3/5AT diode has a standard SOD-123FL package with two pins. The pinout configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Fast recovery time
  • Low leakage current
  • High surge current capability
  • RoHS compliant

Advantages and Disadvantages

Advantages

  • High efficiency
  • Fast switching speed
  • RoHS compliant
  • Suitable for high-frequency applications

Disadvantages

  • Limited maximum average rectified current
  • Relatively low reverse voltage rating

Working Principles

The ES1D-M3/5AT diode operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the opposite direction. When forward biased, it conducts current with minimal voltage drop, making it suitable for rectification and voltage regulation purposes.

Detailed Application Field Plans

The ES1D-M3/5AT diode finds extensive use in various electronic applications, including: - Switching power supplies - LED lighting - Automotive electronics - Consumer electronics - Industrial equipment

Detailed and Complete Alternative Models

Some alternative models to the ES1D-M3/5AT diode include: - 1N4001: General-purpose rectifier diode - 1N4148: High-speed switching diode - 1N5819: Schottky diode - HER108: Ultrafast rectifier diode

In conclusion, the ES1D-M3/5AT diode offers high efficiency, fast switching speed, and suitability for various electronic applications. While it has limitations in terms of maximum average rectified current and reverse voltage rating, its functional features make it a valuable component in electronic circuit design.

[Word count: 411]

技術ソリューションにおける ES1D-M3/5AT の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of ES1D-M3/5AT in technical solutions:

  1. What is ES1D-M3/5AT?

    • ES1D-M3/5AT is a high-speed, low-capacitance transient voltage suppressor diode designed to protect sensitive electronics from voltage transients induced by lightning, ESD, and other transient voltage events.

  2. What are the key features of ES1D-M3/5AT?

    • The key features include low clamping voltage, fast response time, low leakage current, and high surge capability, making it suitable for a wide range of applications.

  3. In what applications can ES1D-M3/5AT be used?

    • ES1D-M3/5AT can be used in various applications such as data lines, telecommunications equipment, industrial control systems, automotive electronics, and consumer electronics.

  4. How does ES1D-M3/5AT protect sensitive electronics?

    • ES1D-M3/5AT suppresses transient voltages by diverting excess current away from sensitive components, thereby preventing damage due to voltage spikes.

  5. What is the maximum clamping voltage of ES1D-M3/5AT?

    • The maximum clamping voltage of ES1D-M3/5AT is typically very low, ensuring that the protected circuitry is not subjected to excessive voltage levels during transient events.

  6. What is the operating temperature range of ES1D-M3/5AT?

    • ES1D-M3/5AT is designed to operate within a wide temperature range, typically from -55°C to 150°C, making it suitable for harsh environmental conditions.

  7. Can ES1D-M3/5AT be used in high-speed data line protection?

    • Yes, ES1D-M3/5AT is well-suited for high-speed data line protection, including applications involving USB, HDMI, Ethernet, and other high-speed interfaces.

  8. Does ES1D-M3/5AT comply with industry standards for surge protection?

    • Yes, ES1D-M3/5AT complies with industry standards such as IEC 61000-4-2 (ESD) and IEC 61000-4-5 (surge), ensuring reliable surge protection for electronic systems.

  9. What package options are available for ES1D-M3/5AT?

    • ES1D-M3/5AT is available in various package options, including SOD-123, SMA, and SMB, providing flexibility for different PCB layouts and space constraints.

  10. Where can I find detailed specifications and application notes for ES1D-M3/5AT?

    • Detailed specifications and application notes for ES1D-M3/5AT can be found on the manufacturer's website or in the product datasheet, providing comprehensive information for design and implementation in technical solutions.