Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ES2D-M3/5BT
詳細を表示 DataSheets

ES2D-M3/5BT Product Overview

Introduction

The ES2D-M3/5BT belongs to the category of semiconductor devices and is commonly used in electronic circuits for various applications. This product possesses unique characteristics and features that make it suitable for specific uses.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Electronic circuit applications
  • Characteristics: High-speed switching, low forward voltage drop
  • Package: SMC (DO-214AB)
  • Essence: Rectifier diode
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Voltage Rating: 200V
  • Forward Current: 2A
  • Reverse Recovery Time: 35ns
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The ES2D-M3/5BT has a standard SMC (DO-214AB) package with two pins. The pin configuration is as follows: 1. Pin 1: Anode 2. Pin 2: Cathode

Functional Features

  • High-speed switching capability
  • Low forward voltage drop
  • Excellent surge current capability
  • Low reverse leakage current

Advantages and Disadvantages

Advantages: - Fast switching speed - Low power loss - Compact package size

Disadvantages: - Limited maximum voltage rating - Sensitivity to temperature variations

Working Principles

The ES2D-M3/5BT operates based on the principle of rectification, allowing current to flow in only one direction within an electronic circuit. It utilizes its high-speed switching and low forward voltage drop characteristics to efficiently control the flow of current.

Detailed Application Field Plans

The ES2D-M3/5BT is widely used in various electronic applications, including: - Power supplies - LED lighting - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • ES1D-M3/5AT: Similar specifications with lower voltage rating
  • ES3D-M3/5BT: Higher voltage rating with similar characteristics
  • ES2G-M3/5BT: Ultrafast recovery diode with different performance attributes

In conclusion, the ES2D-M3/5BT rectifier diode offers high-speed switching and low forward voltage drop, making it suitable for diverse electronic circuit applications. Its compact package and functional features provide advantages in various fields while considering its limitations. Additionally, alternative models are available to accommodate specific requirements in different applications.

Word count: 345

技術ソリューションにおける ES2D-M3/5BT の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is ES2D-M3/5BT?

    • ES2D-M3/5BT is a type of diode bridge rectifier commonly used in power supply and voltage regulation applications.

  2. What are the key features of ES2D-M3/5BT?

    • The key features include a low forward voltage drop, high current capability, and a compact surface mount package.

  3. How is ES2D-M3/5BT typically used in technical solutions?

    • ES2D-M3/5BT is often used to convert alternating current (AC) to direct current (DC) in power supplies, battery chargers, and other electronic devices.

  4. What are the voltage and current ratings for ES2D-M3/5BT?

    • The voltage rating is typically around 200 volts, and the current rating can range from 2 to 5 amps, depending on the specific model.

  5. What are the temperature and storage requirements for ES2D-M3/5BT?

    • ES2D-M3/5BT is designed to operate within a temperature range of -65°C to +150°C, and it should be stored in a dry environment at temperatures below 30°C.

  6. Are there any recommended soldering or mounting techniques for ES2D-M3/5BT?

    • It is recommended to use a reflow soldering technique for surface mount applications, and proper heat sinking may be required for high-power applications.

  7. What are the typical failure modes for ES2D-M3/5BT?

    • Common failure modes include thermal runaway, overvoltage stress, and excessive current flow, which can lead to permanent damage or degradation of the device.

  8. Can ES2D-M3/5BT be used in automotive or industrial applications?

    • Yes, ES2D-M3/5BT is suitable for use in automotive and industrial environments, as it meets industry standards for reliability and performance.

  9. Are there any specific design considerations when using ES2D-M3/5BT in a circuit?

    • Designers should consider the maximum operating conditions, thermal management, and protection circuits to ensure the reliable operation of ES2D-M3/5BT in their application.

  10. Where can I find detailed specifications and application notes for ES2D-M3/5BT?

    • Detailed specifications and application notes for ES2D-M3/5BT can be found in the manufacturer's datasheet and application guides, which are available on their website or through authorized distributors.