Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
FESB16JT-E3/45
詳細を表示 DataSheets

FESB16JT-E3/45

Introduction

The FESB16JT-E3/45 is a power rectifier diode belonging to the category of semiconductor devices. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Power rectification
  • Characteristics: High current capability, low forward voltage drop
  • Package: TO-220AB
  • Essence: Efficient power conversion
  • Packaging/Quantity: Typically packaged in reels or tubes, quantity varies by manufacturer

Specifications

  • Voltage Rating: 45V
  • Current Rating: 16A
  • Forward Voltage Drop: 0.75V at 8A
  • Reverse Recovery Time: 35ns
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The FESB16JT-E3/45 typically has three pins: 1. Anode (A) 2. Cathode (K) 3. Gate (G)

Functional Features

  • High current capability for power applications
  • Low forward voltage drop for energy efficiency
  • Fast reverse recovery time for improved performance

Advantages and Disadvantages

Advantages

  • High current rating allows for use in power applications
  • Low forward voltage drop reduces power dissipation
  • Fast reverse recovery time enhances efficiency

Disadvantages

  • Limited voltage rating compared to some other diodes
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The FESB16JT-E3/45 operates based on the principles of semiconductor physics, utilizing its unique material properties to allow current flow in one direction while blocking it in the reverse direction.

Detailed Application Field Plans

The FESB16JT-E3/45 is commonly used in the following applications: - Power supplies - Motor drives - Inverters - Welding equipment

Detailed and Complete Alternative Models

Some alternative models to the FESB16JT-E3/45 include: - FESB20JT-E3/45: Higher voltage rating - FESB16JT-E3/50: Higher current rating - FESB16FT-E3/45: Fast recovery time variant

In conclusion, the FESB16JT-E3/45 is a power rectifier diode with high current capability, low forward voltage drop, and fast reverse recovery time. Its application spans various power electronics fields, and there are alternative models available to suit specific requirements.

[Word count: 366]

技術ソリューションにおける FESB16JT-E3/45 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum voltage rating for FESB16JT-E3/45?

    • The maximum voltage rating for FESB16JT-E3/45 is 45V.

  2. What is the maximum current rating for FESB16JT-E3/45?

    • The maximum current rating for FESB16JT-E3/45 is 16A.

  3. What type of package does FESB16JT-E3/45 come in?

    • FESB16JT-E3/45 comes in a TO-263AB (D2PAK) package.

  4. What are the typical applications for FESB16JT-E3/45?

    • FESB16JT-E3/45 is commonly used in power management and voltage regulation applications.

  5. What is the forward voltage drop of FESB16JT-E3/45 at its maximum rated current?

    • The forward voltage drop of FESB16JT-E3/45 at its maximum rated current is typically around 0.55V.

  6. Is FESB16JT-E3/45 suitable for automotive applications?

    • Yes, FESB16JT-E3/45 is suitable for automotive applications due to its high current and voltage ratings.

  7. Does FESB16JT-E3/45 require a heatsink for proper operation?

    • It is recommended to use a heatsink with FESB16JT-E3/45, especially when operating at high currents or in elevated ambient temperatures.

  8. What is the reverse recovery time of FESB16JT-E3/45?

    • The reverse recovery time of FESB16JT-E3/45 is typically around 35ns.

  9. Can FESB16JT-E3/45 be used in parallel to increase current handling capability?

    • Yes, FESB16JT-E3/45 can be used in parallel to increase current handling capability in certain applications.

  10. What are the key thermal characteristics of FESB16JT-E3/45?

    • The key thermal characteristics of FESB16JT-E3/45 include low thermal resistance and high junction temperature capability, making it suitable for demanding thermal environments.