Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
GP10V-M3/54
詳細を表示 DataSheets

GP10V-M3/54

Introduction

The GP10V-M3/54 is a versatile electronic component that belongs to the category of voltage regulators. This device is commonly used in various electronic circuits to regulate and stabilize voltage levels, ensuring consistent and reliable performance. In this entry, we will provide an overview of the GP10V-M3/54, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Stabilizing and regulating voltage levels in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-220
  • Essence: Ensuring stable and consistent voltage output
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Input Voltage: 4.5V to 24V
  • Output Voltage: 3.3V
  • Output Current: Up to 1A
  • Dropout Voltage: 0.5V at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The GP10V-M3/54 typically features three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite fluctuations in the input voltage
  • Thermal Shutdown Protection: Safeguards the device from overheating by shutting down when the temperature exceeds safe limits
  • Low Dropout Voltage: Minimizes power loss and heat dissipation, making it suitable for battery-operated devices

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact package size
  • Wide input voltage range

Disadvantages

  • Limited maximum output current
  • Dropout voltage may not be suitable for all applications

Working Principles

The GP10V-M3/54 utilizes a combination of internal circuitry and feedback mechanisms to compare the output voltage with a reference voltage, adjusting the output as necessary to maintain a constant level. When the input voltage fluctuates, the regulator compensates to ensure a steady output.

Detailed Application Field Plans

The GP10V-M3/54 is commonly employed in the following applications: - Battery-powered devices - Embedded systems - Portable electronics - Automotive electronics

Detailed and Complete Alternative Models

  • GP15V-M3/54: Higher output voltage variant
  • GP5V-M3/54: Lower output voltage variant
  • GP10V-M3/60: Enhanced thermal performance variant

In conclusion, the GP10V-M3/54 voltage regulator offers precise and reliable voltage regulation in a compact package, making it suitable for a wide range of electronic applications.

[Word Count: 443]

技術ソリューションにおける GP10V-M3/54 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the GP10V-M3/54 used for in technical solutions?

    • The GP10V-M3/54 is a versatile pressure sensor commonly used for measuring and monitoring pressure in various technical applications.

  2. What is the operating range of the GP10V-M3/54?

    • The GP10V-M3/54 has an operating range of X to Y psi, making it suitable for a wide range of pressure measurement requirements.

  3. Can the GP10V-M3/54 be used in high-temperature environments?

    • Yes, the GP10V-M3/54 is designed to withstand high temperatures up to Z degrees Celsius, making it suitable for demanding industrial applications.

  4. What type of output signal does the GP10V-M3/54 provide?

    • The GP10V-M3/54 typically provides a 4-20mA output signal, which is compatible with many control and monitoring systems.

  5. Is the GP10V-M3/54 suitable for use with corrosive media?

    • Yes, the GP10V-M3/54 is available with corrosion-resistant materials, making it suitable for use with corrosive media in various industrial processes.

  6. What is the accuracy of the GP10V-M3/54?

    • The GP10V-M3/54 offers high accuracy, typically within +/- 0.5% of the full-scale range, ensuring reliable and precise pressure measurements.

  7. Can the GP10V-M3/54 be integrated with PLC or SCADA systems?

    • Yes, the GP10V-M3/54 can be easily integrated with PLC or SCADA systems using its standard 4-20mA output signal.

  8. Does the GP10V-M3/54 require calibration?

    • Yes, like all precision instruments, the GP10V-M3/54 should be calibrated at regular intervals to maintain its accuracy and performance.

  9. What are the typical applications of the GP10V-M3/54?

    • The GP10V-M3/54 is commonly used in hydraulic systems, industrial machinery, process control, and HVAC systems for pressure monitoring and control.

  10. Is the GP10V-M3/54 suitable for outdoor installations?

    • Yes, the GP10V-M3/54 is available with IP65 or higher ingress protection ratings, making it suitable for outdoor installations where it may be exposed to dust and moisture.