Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
GP10YE-E3/73
詳細を表示 DataSheets

GP10YE-E3/73 Product Overview

Introduction

The GP10YE-E3/73 is a component belonging to the category of semiconductor devices. This product is commonly used in electronic circuits for various applications due to its specific characteristics and performance.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Electronic circuitry
  • Characteristics: High efficiency, low power consumption
  • Package: SOD-123 package
  • Essence: Rectifier diode
  • Packaging/Quantity: Available in reels of 3000 units

Specifications

  • Voltage Rating: 100V
  • Current Rating: 1A
  • Forward Voltage Drop: 1V
  • Reverse Leakage Current: 5μA

Detailed Pin Configuration

The GP10YE-E3/73 has a standard SOD-123 package with two pins. The anode is connected to pin 1, and the cathode is connected to pin 2.

Functional Features

  • Efficient rectification of AC to DC
  • Low forward voltage drop
  • Minimal reverse leakage current

Advantages and Disadvantages

Advantages

  • High efficiency
  • Compact size
  • Low power consumption

Disadvantages

  • Limited maximum current rating
  • Vulnerable to overvoltage conditions

Working Principles

The GP10YE-E3/73 operates based on the principle of rectification, allowing the flow of current in one direction while blocking it in the opposite direction. This enables the conversion of alternating current (AC) to direct current (DC) in electronic circuits.

Detailed Application Field Plans

The GP10YE-E3/73 is widely used in the following applications: - Power supplies - Battery chargers - LED lighting - Consumer electronics

Detailed and Complete Alternative Models

  • GP15YE-E3/73: Higher voltage rating
  • GP10YB-E3/73: Lower forward voltage drop
  • GP10YE-E3/54: Different packaging option

In conclusion, the GP10YE-E3/73 is a versatile semiconductor device with efficient rectification capabilities, making it suitable for a wide range of electronic applications.

[Word count: 272]

技術ソリューションにおける GP10YE-E3/73 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the GP10YE-E3/73 component used for in technical solutions?

    • The GP10YE-E3/73 is a general-purpose rectifier diode commonly used in power supply and voltage regulation circuits.

  2. What are the key specifications of the GP10YE-E3/73?

    • The GP10YE-E3/73 has a maximum repetitive reverse voltage of 1000V, average forward current of 1A, and a forward voltage drop of around 1V at 1A.

  3. Can the GP10YE-E3/73 be used in high-frequency applications?

    • Yes, the GP10YE-E3/73 can be used in moderate to high-frequency applications due to its fast switching characteristics.

  4. Is the GP10YE-E3/73 suitable for use in temperature-sensitive environments?

    • The GP10YE-E3/73 has a wide operating temperature range and is suitable for use in various temperature environments.

  5. What are the typical applications of the GP10YE-E3/73 in technical solutions?

    • Typical applications include rectification, freewheeling, and polarity protection in power supplies, inverters, and other electronic circuits.

  6. Does the GP10YE-E3/73 require any special heat dissipation considerations?

    • The GP10YE-E3/73 has a low forward voltage drop and typically does not require special heat dissipation considerations in most applications.

  7. Are there any recommended circuit configurations when using the GP10YE-E3/73?

    • Common circuit configurations include half-wave and full-wave rectifiers, as well as freewheeling and flyback diode configurations in inductive loads.

  8. What are the potential failure modes of the GP10YE-E3/73 in technical solutions?

    • Potential failure modes include overcurrent conditions, reverse voltage breakdown, and thermal overstress under extreme operating conditions.

  9. Can the GP10YE-E3/73 be used in automotive or industrial applications?

    • Yes, the GP10YE-E3/73 is suitable for use in automotive and industrial applications where reliable rectification and voltage regulation are required.

  10. Are there any specific handling or storage precautions for the GP10YE-E3/73?

    • It is recommended to store the GP10YE-E3/73 in an anti-static bag and handle it with proper ESD precautions to prevent damage to the component during handling and storage.