Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MBRF20H50CTHE3/45
詳細を表示 DataSheets

MBRF20H50CTHE3/45

Introduction

The MBRF20H50CTHE3/45 is a high-performance Schottky rectifier designed for various applications. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Product Overview

  • Category: Semiconductor/Electronic Component
  • Use: Rectification in power supply and conversion circuits
  • Characteristics: High efficiency, low forward voltage drop, fast switching, and high current capability
  • Package: TO-220AB
  • Essence: Schottky rectifier diode
  • Packaging/Quantity: Tape & Reel (45 pieces)

Specifications

  • Voltage Rating: 50V
  • Current Rating: 20A
  • Forward Voltage Drop: 0.55V at 10A
  • Reverse Leakage Current: 100µA at 50V
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The MBRF20H50CTHE3/45 follows the standard pin configuration for a TO-220AB package: 1. Anode 2. Cathode 3. Not connected (Tab)

Functional Features

  • High current capability
  • Low power loss
  • Fast switching speed
  • High efficiency

Advantages and Disadvantages

Advantages

  • Reduced heat sink requirements
  • Enhanced system reliability
  • Improved thermal performance
  • Higher power density

Disadvantages

  • Higher cost compared to standard rectifiers
  • Sensitivity to reverse voltage spikes

Working Principles

The MBRF20H50CTHE3/45 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The MBRF20H50CTHE3/45 is suitable for various applications, including: - Switching power supplies - DC-DC converters - Reverse polarity protection circuits - Motor drive circuits - Solar panel bypass diodes

Detailed and Complete Alternative Models

Some alternative models to the MBRF20H50CTHE3/45 include: - STPS20H100CT - IRF20H50 - SS24H

In conclusion, the MBRF20H50CTHE3/45 is a high-performance Schottky rectifier with versatile applications in power supply and conversion circuits. Its high efficiency, fast switching, and high current capability make it a preferred choice for various electronic designs.

Word Count: 345

技術ソリューションにおける MBRF20H50CTHE3/45 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MBRF20H50CTHE3/45 diode used for?

    • The MBRF20H50CTHE3/45 diode is commonly used as a rectifier in power supply and voltage regulation applications.

  2. What are the key specifications of the MBRF20H50CTHE3/45 diode?

    • The MBRF20H50CTHE3/45 diode has a maximum average forward current of 20A, a reverse voltage of 50V, and a low forward voltage drop.

  3. How does the MBRF20H50CTHE3/45 diode compare to other similar diodes?

    • The MBRF20H50CTHE3/45 diode offers high efficiency, fast switching speed, and low reverse recovery time compared to other diodes in its class.

  4. Can the MBRF20H50CTHE3/45 diode be used in high-temperature environments?

    • Yes, the MBRF20H50CTHE3/45 diode is designed to operate reliably at elevated temperatures, making it suitable for demanding industrial and automotive applications.

  5. What are some typical applications for the MBRF20H50CTHE3/45 diode?

    • The MBRF20H50CTHE3/45 diode is commonly used in switch-mode power supplies, DC-DC converters, motor drives, and battery charging circuits.

  6. Does the MBRF20H50CTHE3/45 diode require any special heat sinking or thermal management?

    • Depending on the application and operating conditions, proper heat sinking and thermal management may be necessary to ensure optimal performance and reliability.

  7. Is the MBRF20H50CTHE3/45 diode suitable for use in high-frequency switching applications?

    • Yes, the MBRF20H50CTHE3/45 diode's fast recovery characteristics make it well-suited for high-frequency switching applications.

  8. What are the potential benefits of using the MBRF20H50CTHE3/45 diode in a technical solution?

    • The MBRF20H50CTHE3/45 diode offers low conduction losses, high efficiency, and excellent surge capability, contributing to improved overall system performance.

  9. Are there any specific considerations for circuit design when using the MBRF20H50CTHE3/45 diode?

    • Proper attention to layout, decoupling, and snubber circuitry can help optimize the performance and reliability of the MBRF20H50CTHE3/45 diode in a given application.

  10. Where can I find detailed technical information and application notes for the MBRF20H50CTHE3/45 diode?

    • Detailed technical information, including datasheets and application notes, for the MBRF20H50CTHE3/45 diode can be obtained from the manufacturer's website or authorized distributors.