Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
P4KE510A-E3/54
詳細を表示 DataSheets

P4KE510A-E3/54

Introduction

The P4KE510A-E3/54 is a diode belonging to the category of transient voltage suppressors (TVS). This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the P4KE510A-E3/54.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage transients in electronic circuits
  • Characteristics: Fast response time, high surge capability, low clamping voltage
  • Package: DO-41
  • Essence: TVS diode for overvoltage protection
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier

Specifications

  • Peak Pulse Power: 400W
  • Breakdown Voltage: 440V
  • Clamping Voltage: 710V
  • Peak Pulse Current: 10A
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The P4KE510A-E3/54 is a two-terminal device with anode and cathode connections. The pin configuration is as follows: - Anode (A) - Terminal 1 - Cathode (K) - Terminal 2

Functional Features

  • Transient Voltage Suppression: Provides protection against voltage transients by diverting excessive current away from sensitive components.
  • Fast Response Time: Reacts quickly to transient events, limiting the duration of overvoltage conditions.
  • High Surge Capability: Can withstand large surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes
  • Fast response time
  • Compact and easy to integrate into circuit designs

Disadvantages

  • Clamping voltage may be relatively high for some applications
  • Limited to unidirectional transient voltage suppression

Working Principles

The P4KE510A-E3/54 operates based on the principle of avalanche breakdown. When a transient voltage spike occurs, the diode enters a high-conductivity state, shunting excess current away from the protected circuitry. This action limits the voltage across the circuit, preventing damage to sensitive components.

Detailed Application Field Plans

The P4KE510A-E3/54 is commonly used in various electronic systems requiring protection against voltage transients, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • P4KE6.8A-E3/54: Similar TVS diode with lower breakdown voltage
  • P4KE440A-E3/54: Similar TVS diode with higher breakdown voltage
  • P4KE510CA-E3/54: Similar TVS diode with tighter clamping voltage tolerance

In conclusion, the P4KE510A-E3/54 is a reliable transient voltage suppressor diode offering effective protection against voltage transients in various electronic applications. Its fast response time, high surge capability, and compact package make it a popular choice for circuit protection.

Word count: 443

技術ソリューションにおける P4KE510A-E3/54 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of P4KE510A-E3/54 in technical solutions:

  1. What is the maximum peak pulse power dissipation of P4KE510A-E3/54?

    • The maximum peak pulse power dissipation is 400 watts for a 10/1000 μs waveform.

  2. What is the breakdown voltage of P4KE510A-E3/54?

    • The breakdown voltage is 510 volts.

  3. Can P4KE510A-E3/54 be used for overvoltage protection in power supplies?

    • Yes, P4KE510A-E3/54 can be used for overvoltage protection in power supplies due to its high breakdown voltage and power dissipation capabilities.

  4. What is the typical clamping voltage of P4KE510A-E3/54?

    • The typical clamping voltage is 654 volts at 1 ampere.

  5. Is P4KE510A-E3/54 suitable for surge protection in telecommunications equipment?

    • Yes, P4KE510A-E3/54 is suitable for surge protection in telecommunications equipment due to its high power dissipation and fast response time.

  6. What is the operating temperature range of P4KE510A-E3/54?

    • The operating temperature range is -55°C to +175°C.

  7. Can P4KE510A-E3/54 be used for ESD protection in automotive electronics?

    • Yes, P4KE510A-E3/54 can be used for ESD protection in automotive electronics due to its robust construction and high reliability.

  8. Does P4KE510A-E3/54 meet industry standards for transient voltage suppressors?

    • Yes, P4KE510A-E3/54 meets industry standards such as IEC 61000-4-5 for surge protection devices.

  9. What package type does P4KE510A-E3/54 come in?

    • P4KE510A-E3/54 is available in a DO-41 package.

  10. Can P4KE510A-E3/54 be used for protecting sensitive electronic components in industrial control systems?

    • Yes, P4KE510A-E3/54 is suitable for protecting sensitive electronic components in industrial control systems from voltage transients and surges.

I hope these questions and answers are helpful for your technical solutions involving P4KE510A-E3/54. Let me know if you need further assistance!