SE07PG-M3/84A
Product Overview
- Category: Semiconductor
- Use: Power management
- Characteristics: High efficiency, compact design
- Package: SOT-223
- Essence: Voltage regulator
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Input Voltage Range: 4.5V to 18V
- Output Voltage: 3.3V
- Output Current: 1A
- Dropout Voltage: 300mV
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Pin 1: Input
- Pin 2: Ground
- Pin 3: Output
Functional Features
- Overcurrent protection
- Thermal shutdown
- Short-circuit protection
Advantages and Disadvantages
- Advantages:
- Wide input voltage range
- Compact package
- Built-in protection features
- Disadvantages:
- Limited output current compared to some alternatives
Working Principles
The SE07PG-M3/84A is a voltage regulator that maintains a stable output voltage despite variations in the input voltage or load conditions. It achieves this by using feedback control to adjust its internal circuitry.
Detailed Application Field Plans
This voltage regulator is suitable for various applications requiring a stable 3.3V power supply, such as: - Battery-powered devices - IoT devices - Industrial automation
Detailed and Complete Alternative Models
- SE05PG-M3/84A: Lower output current but smaller footprint
- SE10PG-M3/84A: Higher output current with a slightly larger package
Note: The above information is for reference purposes only. For detailed specifications and application guidelines, please refer to the product datasheet.
Word count: 287
技術ソリューションにおける SE07PG-M3/84A の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the SE07PG-M3/84A used for in technical solutions?
- The SE07PG-M3/84A is a high-performance semiconductor device commonly used as a power rectifier in various technical solutions.
What are the key specifications of the SE07PG-M3/84A?
- The SE07PG-M3/84A typically has a maximum repetitive reverse voltage of 1000V, a forward current of 7A, and a low forward voltage drop.
How does the SE07PG-M3/84A contribute to improving efficiency in technical solutions?
- The SE07PG-M3/84A's low forward voltage drop helps minimize power losses, leading to improved efficiency in technical solutions.
What are the typical applications of the SE07PG-M3/84A in technical solutions?
- Common applications include power supplies, inverters, converters, and motor drives where efficient rectification is essential.
What are the advantages of using the SE07PG-M3/84A over other rectifier options?
- The SE07PG-M3/84A offers high reliability, fast switching capabilities, and low conduction losses, making it a preferred choice for many technical solutions.
Are there any specific thermal considerations when using the SE07PG-M3/84A?
- It is important to ensure proper heat sinking and thermal management to maintain the SE07PG-M3/84A within its specified operating temperature range for optimal performance and longevity.
Can the SE07PG-M3/84A be used in high-frequency applications?
- Yes, the SE07PG-M3/84A is suitable for high-frequency operation due to its fast recovery time and low junction capacitance.
What precautions should be taken when integrating the SE07PG-M3/84A into a technical solution?
- Care should be taken to avoid exceeding the maximum ratings, and proper ESD handling procedures should be followed to prevent damage during assembly.
Does the SE07PG-M3/84A require any special drive circuitry or protection components?
- While the SE07PG-M3/84A is relatively straightforward to drive, appropriate snubber circuits and overvoltage protection may be necessary depending on the application requirements.
Where can I find detailed application notes and reference designs for implementing the SE07PG-M3/84A in technical solutions?
- Comprehensive application notes and reference designs can be found in the product datasheet, technical documentation, and online resources provided by the manufacturer.