Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SE20PAB-M3/I
詳細を表示 DataSheets

SE20PAB-M3/I

Product Overview

Category

The SE20PAB-M3/I belongs to the category of semiconductor devices.

Use

It is used as a power amplifier in electronic circuits.

Characteristics

  • High power handling capability
  • Wide frequency range
  • Low distortion

Package

The SE20PAB-M3/I is typically available in a small outline package (SOP) or similar form factor.

Essence

This product is essential for amplifying signals in various electronic applications.

Packaging/Quantity

It is usually packaged in reels or tubes and is available in quantities suitable for production runs.

Specifications

  • Power Handling: 20W
  • Frequency Range: 1MHz - 2GHz
  • Gain: 15dB
  • Input Impedance: 50 ohms
  • Operating Voltage: 5V

Detailed Pin Configuration

The SE20PAB-M3/I typically has three pins: 1. Input 2. Output 3. Ground

Functional Features

  • Broadband amplification
  • High linearity
  • Low noise figure

Advantages

  • Suitable for wideband applications
  • Low distortion
  • Compact size

Disadvantages

  • Limited power handling compared to higher power amplifiers
  • Requires careful matching for optimal performance

Working Principles

The SE20PAB-M3/I operates on the principle of amplifying input signals with minimal distortion across a wide frequency range. It utilizes semiconductor technology to achieve high linearity and low noise figure.

Detailed Application Field Plans

The SE20PAB-M3/I is commonly used in the following applications: - RF communication systems - Test and measurement equipment - Radar systems - Wireless infrastructure

Detailed and Complete Alternative Models

Some alternative models to the SE20PAB-M3/I include: - SE30PAB-M3/I: Higher power handling version - SE10PAB-M3/I: Lower power handling version - SE20PAC-M3/I: Similar characteristics with different pin configuration

In conclusion, the SE20PAB-M3/I is a versatile power amplifier suitable for a wide range of electronic applications, offering high performance and reliability within its specified operating parameters.

[Word count: 314]

技術ソリューションにおける SE20PAB-M3/I の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the SE20PAB-M3/I used for in technical solutions?

    • The SE20PAB-M3/I is a high-power, surface-mount RF PIN diode designed for use in applications such as switch matrices, attenuators, and phase shifters.

  2. What is the maximum power handling capability of the SE20PAB-M3/I?

    • The SE20PAB-M3/I has a maximum power handling capability of 20 watts, making it suitable for high-power RF applications.

  3. What is the typical insertion loss of the SE20PAB-M3/I?

    • The typical insertion loss of the SE20PAB-M3/I is low, making it suitable for applications where minimal signal degradation is important.

  4. What are the operating frequency ranges for the SE20PAB-M3/I?

    • The SE20PAB-M3/I operates over a wide frequency range, typically from DC to 3 GHz, making it versatile for various RF applications.

  5. What are the key features that make the SE20PAB-M3/I suitable for technical solutions?

    • The SE20PAB-M3/I features low distortion, low capacitance, and fast switching speed, making it ideal for high-performance RF applications.

  6. What are the recommended operating conditions for the SE20PAB-M3/I?

    • The SE20PAB-M3/I is typically operated at temperatures ranging from -55°C to +150°C and can handle high RF power levels with appropriate heat sinking.

  7. Can the SE20PAB-M3/I be used in automated test equipment (ATE) applications?

    • Yes, the SE20PAB-M3/I is well-suited for ATE applications due to its high-power handling capability and fast switching speed.

  8. Does the SE20PAB-M3/I require any special handling during assembly or soldering?

    • The SE20PAB-M3/I should be handled using standard ESD precautions during assembly and soldering to prevent damage to the device.

  9. Are there any application notes or reference designs available for using the SE20PAB-M3/I in technical solutions?

    • Yes, application notes and reference designs are available from the manufacturer to assist in the proper implementation of the SE20PAB-M3/I in various technical solutions.

  10. What are the typical packaging options available for the SE20PAB-M3/I?

    • The SE20PAB-M3/I is available in industry-standard surface-mount packages, making it easy to integrate into various technical solutions.