Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SMCG7.0CA-M3/9AT
詳細を表示 DataSheets

SMCG7.0CA-M3/9AT

Introduction

The SMCG7.0CA-M3/9AT is a diode belonging to the category of semiconductor devices. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Diode
  • Use: The SMCG7.0CA-M3/9AT diode is commonly used for voltage regulation, surge protection, and rectification in electronic circuits.
  • Characteristics: It exhibits high reliability, low forward voltage drop, and fast response time.
  • Package: The diode is typically available in a surface mount DO-215AB (SMCG) package.
  • Essence: It serves as a crucial component in protecting sensitive electronic devices from voltage surges and transients.
  • Packaging/Quantity: The diode is usually packaged in reels or trays containing a specific quantity per package.

Specifications

  • Voltage Rating: 7.0V
  • Peak Pulse Power: 1500W
  • Operating Temperature Range: -55°C to +175°C
  • Forward Voltage Drop: 0.9V at 10A
  • Reverse Standoff Voltage: 6.40V
  • Breakdown Voltage: 7.0V
  • Maximum Reverse Leakage Current: 1μA at 7.0V

Detailed Pin Configuration

The SMCG7.0CA-M3/9AT diode has a standard pin configuration with two terminals: the anode and the cathode. The anode is typically denoted by a line on the diode body, while the cathode is the other terminal.

Functional Features

  • Transient Voltage Suppression: Effectively suppresses transient voltage spikes and surges.
  • Fast Response Time: Rapidly clamps transient voltages to protect downstream components.
  • Low Clamping Voltage: Provides reliable overvoltage protection for sensitive electronics.

Advantages and Disadvantages

Advantages

  • High reliability and durability
  • Fast response time
  • Low forward voltage drop

Disadvantages

  • Limited reverse standoff voltage
  • Sensitive to excessive current and power dissipation

Working Principles

The diode operates based on the principle of avalanche breakdown and Zener effect. When a voltage surge occurs, the diode rapidly conducts, diverting excess current away from the protected circuitry and limiting the voltage across it.

Detailed Application Field Plans

The SMCG7.0CA-M3/9AT diode finds extensive use in various applications, including: - Surge protection in telecommunications equipment - Overvoltage protection in power supplies - Transient voltage suppression in automotive electronics - Circuit protection in industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the SMCG7.0CA-M3/9AT diode include: - SMAJ7.0A - P6SMB7.0A - 1.5SMC7.0A

In conclusion, the SMCG7.0CA-M3/9AT diode is a critical component in electronic circuits, providing reliable surge protection and voltage regulation. Its fast response time and low forward voltage drop make it suitable for a wide range of applications.

Word Count: 443

技術ソリューションにおける SMCG7.0CA-M3/9AT の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is SMCG7.0CA-M3/9AT?

    • SMCG7.0CA-M3/9AT is a type of TVS (transient voltage suppressor) diode used for surge protection in electronic circuits.

  2. What are the key features of SMCG7.0CA-M3/9AT?

    • The key features include a peak pulse power of 3000W, low clamping voltage, and fast response time.

  3. How is SMCG7.0CA-M3/9AT used in technical solutions?

    • It is commonly used to protect sensitive electronic components from voltage spikes and transient surges in applications such as power supplies, communication equipment, and industrial controls.

  4. What are the typical operating conditions for SMCG7.0CA-M3/9AT?

    • The typical operating conditions include a maximum junction temperature of 150°C, a forward voltage of 3.5V at 7.0A, and a reverse leakage current of 1μA at 7V.

  5. What are the recommended mounting and handling practices for SMCG7.0CA-M3/9AT?

    • It should be mounted on a heat sink or thermal pad to dissipate heat effectively, and proper ESD (electrostatic discharge) precautions should be followed during handling.

  6. Can SMCG7.0CA-M3/9AT be used in automotive applications?

    • Yes, it is suitable for automotive electronics to protect against voltage transients in vehicle electrical systems.

  7. What are the industry standards and certifications applicable to SMCG7.0CA-M3/9AT?

    • It complies with RoHS (Restriction of Hazardous Substances) and is often certified to meet AEC-Q101 standards for automotive-grade components.

  8. How does SMCG7.0CA-M3/9AT compare to other TVS diodes in terms of performance?

    • It offers high surge capability and low clamping voltage, making it suitable for demanding applications where reliable surge protection is essential.

  9. Are there any application notes or design guidelines available for using SMCG7.0CA-M3/9AT in circuit designs?

    • Yes, application notes and design guidelines are provided by the manufacturer to assist engineers in integrating the diode effectively into their designs.

  10. Where can I purchase SMCG7.0CA-M3/9AT and what are the packaging options available?

    • It is available through authorized distributors and comes in various packaging options such as tape and reel or bulk packaging to suit different production requirements.